Owner`s manual

ManualsBrandsR.H. Peterson ManualsBurnerG4-24A-SS

No. L-A2-17509

REV 7 - 0903130830

Owner’s

Manual

ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746

Important: Read this manual carefully before starting installation of the log set.

Models:

G4-18/20-SS

G4-24-SS

G4-30-SS

WARNING

Improper installation, adjustment, alteration,

service, or maintenance can cause injury or

property damage. Refer to this manual. For

assistance or additional information consult a

qualiﬁ ed professional installer, service agency,

or gas supplier.

CODE AND SUPPLY REQUIREMENTS

This outdoor burner must be installed in accordance

with local codes and ordinances, or in the absence of

local codes, with the latest National Fuel Gas Code,

ANSI Z223.1.

G4-Stainless Steel Burner For Outdoor Use Only

For use with

natural gas

only

INSTALLER: Leave these instructions with consumer.

CONSUMER: Retain for future reference.

- Do not store or use gasoline or other

ﬂ ammable vapors and liquids in the

vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS:

• Open a window.

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use

any phone in the building.

• Immediately call the gas supplier from a

neighbor’s phone. Follow the gas supplier’s

instructions.

• If you cannot reach the gas supplier, call the

ﬁ re department.

- Installation and service must be performed

by a qualiﬁ ed installer, service agency, or the

gas supplier.

If the information in this manual is not

followed exactly, a fire or explosion

may result, causing property damage,

personal injury, or loss of life.

WARNING

This appliance is designed as an attended

appliance. Adults must be present when the

unit is operating. DO NOT leave this unit burning

when unattended. If this product is left burning

unattended it may cause damage or serious

injury.

Summary of content (14 pages)

PAGE 1
Owner’s Manual Models: For use with natural gas only G4-18/20-SS G4-24-SS G4-30-SS G4-Stainless Steel Burner For Outdoor Use Only Important: Read this manual carefully before starting installation of the log set. CODE AND SUPPLY REQUIREMENTS This outdoor burner must be installed in accordance with local codes and ordinances, or in the absence of local codes, with the latest National Fuel Gas Code, ANSI Z223.1.
PAGE 2
TABLE OF CONTENTS SAFETY INFORMATION PARTS LIST BEFORE YOU BEGIN - IMPORTANT INFORMATION INSTALLING THE DAMPER CLAMP INSTALLATION LOG PLACEMENT CHARRED SERIES SUPPLEMENTAL INSTRUCTIONS OPERATING THE LOG SET - LIGHTING AND EXTINGUISHING NOTES PAGE TECHNICAL DATA AND SPECIFICATION INFORMATION TROUBLESHOOTING THE GAS LOG SET WARRANTY 2 3 4 5 5 7 8 9 10 11 12 14 SAFETY INFORMATION 1.
PAGE 3
PARTS LIST Before beginning installation, be sure the gas log set is complete by comparing its contents with this PARTS LIST. The RG4-24 set is listed and illustrated. The parts may differ depending upon the log style and size of the set. Be sure you know the model number and size of your set when ordering replacement or optional parts and accessories. 9 6 4 Large adapter 9a Replacement parts can be ordered from your local dealer.
PAGE 4
BEFORE YOU BEGIN - IMPORTANT INFORMATION Before You Begin, review the information and safeguards below about the installation and operation of the Real-Fyre® gas log set. Fig. 4-1 Fireplace dimensions Check to be sure that the fireplace meets the venting and construction requirements for the installation of the Real-Fyre® gas log set. Rear width THIS BURNER IS DESIGNED FOR USE WITH NATURAL GAS. Never use propane gas in this burner.
PAGE 5
INSTALLING THE DAMPER CLAMP A damper clamp is provided as a means to prevent full 4. Should the damper clamp not fit, install a permanent damper stop or provide some other means of and/or accidental closure of the fireplace damper when installed as illustrated (Fig. 5-2). When the gas log preventing full and/or accidental closure of the damper. set is operating, the damper must be fully open. To install the damper clamp: 1. Open the fireplace damper. 2. Place the damper clamp over the damper blade (Fig.
PAGE 6
INSTALLATION (cont.) CONNECTING THE GAS SUPPLY GRANULE PLACEMENT 1. The burner pan is supplied with a fuel injector for natural gas. The fuel injector must be used in ALL installations. The fuel injector has a precisely sized orifice to ensure only the proper quantity of gas enters the burner. This allows maximum performance and gas conservation. The granules supplied with the unit are specially selected for use with natural gas. They maximize flame distribution and reduce carbon buildup. 1.
PAGE 7
LOG PLACEMENT The beauty and design of the Real-Fyre® gas logs are the result of skilled craftsmanship, research, and engineering. The fine quality materials used to mold the logs are formulated from kiln-fired ceramics, superior refractories and the best expanded shales and aggregates, exactly proportioned. Added to this material are steel reinforcing rods, precisely sized and designed to prevent breakage. This creates realistic, long-lasting logs.
PAGE 8
CHARRED SERIES SUPPLEMENTAL INSTRUCTIONS These instructions must be used with the Charred series gas log set series EMBER COALS PLACEMENT Attach the ember bed to the burner by slipping it onto the back edge (center left to right) with the perforated section facing towards the back fireplace wall. Fig. 8-1 Ember bed Part No. CHD-01 Cover the surface of the ember bed with the ember coals (Fig. 8-1).
PAGE 9
OPERATING THE LOG SET - LIGHTING AND EXTINGUISHING FOR YOUR SAFETY, READ BEFORE LIGHTING WARNING: If you do not follow these instructions exactly, a fire or explosion may result, causing property damage, personal injury, or loss of life. C. Do not use the gas log set if any part has been underwater. Immediately call a qualified service technician to inspect the gas log set and to replace any part of the control system and any gas control that has been underwater. A.
PAGE 10
NOTES PAGE REV 7 - 0903130830 10 No.
PAGE 11
TECHNICAL DATA AND SPECIFICATION INFORMATION MAINTENANCE SERVICE Once installed and operating properly, the RealFyre® gas log set requires very little maintenance. You should inspect the log set and control annually for the following: 1. Excessive sooting - Some sooting of the log set is normal and adds to the appearance of burned wood. If sooting accumulates, you may brush the soot off with a stiff brush. Do not use water or soot cleaners to clean off the soot.
PAGE 12
TROUBLESHOOTING THE GAS LOG SET SYMPTOM 1. Excessive smoking and sooting CAUSE A. Poor draft or down draft Note: Like burning natural firewood, the RealFyre® gas log set is designed to burn with a yellow smoky flame. Some sooting is common and desirable. C. Damper closed D. Set is positioned too close to the front of the firebox E. Improper log placement F. Flue is less than 8" in diameter 2. Low flame A. Incorrect log set size for burner system B. Insufficient gas supply C.
PAGE 13
TROUBLESHOOTING THE GAS LOG SET (cont.) SYMPTOM 3. Uneven flame distribution (Lower at one end of the burner) REV 7 - 0903130830 CAUSE A. Clogged or blocked portholes A. B. Insufficient gas pressure and/or supply C. Granules may be packed down too tightly or not evenly B. D. Auxiliary shut-off valve partially closed D. 13 C. SOLUTION Portholes can be cleared of foreign object by running a wire through them. Consult installer or plumber (see solution 2b).
PAGE 14
WARRANTY PETERSON VENTED GAS LOG SETS LIMITED WARRANTY All Peterson gas logs are WARRANTED for as long as you own them (lifetime). All Peterson burner assemblies are WARRANTED for TEN (10) YEARS. SPK-26 controls are covered by a THREE (3) YEAR “All Parts” Warranty. All other Peterson valves, pilots, and controls are covered by a ONE (1) YEAR Limited Warranty (excluding batteries).