Owner`s manual

22
INSTALLATION (Cont.)
GLOWING EMBER PLACEMENT
The Glowing Embers are supplied in a single bag (Fig. 22-1). It is important that the embers be used in the
designated application and that no additional embers be added. Open the bag and spread the embers loosely
along the entire length of the ember burner (Fig. 22-3) from left to right on the burner and on the vertical
portion of the ember burner. Break up any clumps that may have developed during shipment, and make
sure the embers are spread evenly over the entire area. Bryte Coals
TM
are placed over the glowing embers,
also spreading out evenly (Figs. 22-2, 22-3). Failure to follow these instructions will result in unsafe operation.
Important: Do not add any additional embers or Bryte Coals
TM
to this log set. Any additional embers
may cause unsafe operation.
WARNING
All previously applied loose material, such as embers, must be removed prior to reapplication. All
replacement loose material must be purchased from the original appliance manufacturer.
LAVA-FYRE GRANULES
TM
PLACEMENT
Lava-Fyre Granules
TM
are provided as an aesthetic enhancement to the G18 unvented gas log set.
Spread the granules (see Parts List) on the fl oor of the fi rebox around the front and the sides of the unvented
gas log set.
BE SURE THAT NO GRANULES ENTER THE MAIN BURNER OR INTERFERE WITH THE BURNING OF
THE LOG SET.
WARNING: Failure to position the parts in accordance with these diagrams, or failure to use only parts
specifi cally approved with this log set, may result in property damage or personal injury.
Fig. 22-1
Fig. 22-2
Fig. 22-3