- R & M Supply Greenhouse Controller Specification Sheet

Page 10

MAINTENANCE / SPECIFICATIONS

SPECIFICATIONS:

System operating voltage 120vac +/- 20% @ 50-60 Hertz

Maximum Switching amperage 15-amps @ 120vac

Overload protection 15-amp normal blow fuse

Operating temperature 0 - 50’ C / 32 - 122’ F

Maximum humidity 95% RH (Non-condensing)

Temperature control range 50-115’ F with a 7’ F differential, +/- 3.6’

Humidity control range 20 - 80% RH with a 5% differential

Adjustable timer repeatability +/- .2% under fixed conditions

Timer setting accuracy +/- 5%

Hydro “ON” timer 1 second to 40 minutes

Hydro “OFF” timer 1 minute to 8 hours

CO2 Inject duration timer 1 second to 40 minutes

CO2 Inject frequency timer 1 minute to 8 hours

24-hour timeclock accuracy +/- 3% monthly

Dimensions 10” X 8” X 7”

Weight Less than 6 lbs.

Relay operations Minimum 100,000 electrical / 10,000,000 mechanical

MAINTENANCE:

1) Consult the troubleshooting chart for a listing of the most common problems.

2) DO NOT open the enclosure!!! There are no components that require maintenance.

3) Do not use this equipment for purposes other than what it is designed for. It will provide many years of trouble-free

service when used properly.

4) In the event you cannot solve the problem, first consult the dealer who sold the unit then contact the factory for

instructions on how to return it to the factory for repair.

PUBLISHED BY R & M Supply INC.

Liability statement:

R & M Supply and their retailers and distributors are not responsible for any damage or injuries (consequential or otherwise)

arising from the use of this device. The purchaser assumes all responsibility for the use and proper installation of this device.