Manual

ManualsBrandsR&M Materials Handling ManualsHoistELECTRIC CHAIN HOISTS LoadMate Chain Hoist LM 10

LM10 I&M MANUAL/EN/11.30.2010

23/85

This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret

that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.

7 MAINTENANCE

7.1 Basic Hoist Construction

Figure 9. Basic Hoist Components

1. LOAD BLOCK ASSEMBLY (2-FALL SHOWN)

2. LOAD CHAIN

3. ELECTRICAL CONTROL ENCLOSURE

4. TOP HOOK

5. HOIST GEAR BOX ASSEMBLY

6. CHAIN CONTAINER & HARDWARE

7. HOIST BODY / MOTOR

8. LOAD HOOK SAFETY LATCH

9. FASTENER

10. PIN

7.2 Motor / Body

The hoist motors are designed to provide dependable hoisting service. The standard motors are enclosed

for IP55 rated protection against normal hazards of dust and moisture. The motor bearings are sealed and

do not require further greasing.

The hoist body is constructed of aluminum and requires no maintenance. Remove from service and replace

the hoist body if damaged.