Service Manual

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: [phone]
FAX: (937) 325
-
5319
9/53
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
2 IDENTIFICATION
2.1 Product identification data
This manual covers the installation and use of the switch based frequency converter model.
Converter can be used on traveling movement application and chain hoist lifting application. Application type is
selected with switch S10-2. Switch settings are explained on section Parameters.
CAUTION
Application type selection done with switch S10-2 changes the basic
functionality of converter. Pay special attention that apllication is selected
correctly with switch S10-2. Wrong switching will cause potentially hazardous
situation.
Front panels of frequency converter models:
The 003 model The 006 model