Service Manual Instruction Manual

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: [phone]
FAX: (937) 325
-
5319
10/83
R&M Materials Handling, I
nc. reserves the right to alter or amend the above information without notice.
Speed Parameter Input
Speed 1 P2.2.8. / P2.2.9. S1/ S2
Speed 2 P2.1.7. MS 2
Speed 3 P2.1.8. MS 3
Speed 4 P2.1.9. MS 4
1.6.1 EP2-control
c_coep2a
A. Pushbutton / controller position
B. Speed
 0) “decelerate to zero”
 1) while starting “drive minimum speed”
 while running “hold speed”
 2) while running “accelerate”
 while running at maximum speed “hold speed”
1.6.2 EP3-control
c_coep3a
A. Pushbutton / controller position
B. Speed
 0) “decelerate to zero”
 1) step 1 “drive minimum speed”
 2) step 2 “hold speed”
 3) step 3 while running “accelerate”
 while running at maximum speed “hold speed”