Service Manual Instruction Manual

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: [phone]
FAX: (937) 325
-
5319
34/83
R&M Materials Handling, I
nc. reserves the right to alter or amend the above information without notice.
MWh Counter T6.8.2.1. MWh counter, can be reseted
Clr MWh Counter P6.8.2.2. Clear MWh counter T6.8.2.1. Not reset / Reset
PwOn Day Counter T6.8.2.3. Number of power on days
PwOn hour count. T6.8.2.4. Number of power on hours
Clr Optime cntr T6.8.2.5. Clear trip counters T6.8.2.1. – T6.8.2.4.
S6.8.3. Software
Software package I6.8.3.1. See software sticker under display, IND3V114 NXP00002V182
SystemSw version I6.8.3.2. 33.02.9431
Firmware interf. I6.8.3.3. 4.64
System load I6.8.3.4. Load of CPU %
S6.8.4. Applications
A6.8.4.1. Crane
Application id D6.8.4.1.1. See software sticker under display, IND3V114 Industr3
Version D6.8.4.1.2. See software sticker under display, IND3V114 11.40
Firmware interf. D6.8.4.1.3. 4.62
S6.8.5. Hardware
Power unit I6.8.5.1. Power unit id code
Unit voltage I6.8.5.2. Nominal voltage of D2V 500V
Brake chopper E6.8.5.3. There is brake chopper in D2V No
Brake resistor E6.8.5.4. No braking resistor inside D2V No
Serial number E6.8.5.5. Serial number of CSU
S6.8.6. Expander boards
E6.8.6.1. A:NXOPTA6
State E6.8.6.1.1. State of board in slot A Run
Program version E6.8.6.1.2. Program version of board in slot A 0.0
E6.8.6.2. B:NXOPTA3
State E6.8.6.2.1. State of board in slot B Run
Program version E6.8.6.2.2. Program version of board in slot B 10005.0
E6.8.6.3. C:SSU
State E6.8.6.3.1. State of board in slot B Run
Program version E6.8.6.3.2. Program version of board in slot B 10503.14
E6.8.6.4. D:NXOPTB9
State E6.8.6.4.1. State of board in slot B Run
Program version E6.8.6.4.2. Program version of board in slot B 10501.4
E6.8.6.5. E: No board
S6.8.7. Debug
Not used
S6.9. Power monitor
IU filtered V6.9.1. U phase current A
IV filtered V6.9.2. V phase current A
IW filtered V6.9.3. W phase current A
U Temperature V6.9.4. Phase U temperature
°C
V Temperature V6.9.5. Phase V temperature
°C
W Temperature V6.9.6. Phase W temperature
°C
Card Temperature V6.9.7. Card temperature
°C
S6.11 Power multimon.
Power multimonitor V6.11.1. Output current values and power card temperature
M7 Active faults
The memory of active faults can store the maximum of 10 faults in the