Manual

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: [phone]
FAX: [phone]
49/76
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
9.2 Chain hoist
endstop-chain
To assemble the buffer stops:
•
Make sure that the buffer hits center (1) of the buffer stop.
• Check, that the buffer stops (2) will stop the hoist on both ends of the crane, not the cable trollies!
• Tightening torques:
- M10 45 Nm
- M12 77 Nm
- M20 170 Nm