Instruction manual

Machine Model
Description Part Number
Plasma Cut 40 KUPJR40
Tecnical Specification
MAIN PARAMETER
Input voltage (V)
Input Frequency (Hz)
Input capacitance (KVA)
No-load voltage (V)
Current range (A)
Output cutting voltage (V)
Rated duty cycle (%)
Efficiency (%)
Power factor
Insulation class
Protection class
Arc Starting
Air flow (Litres/min)
Compressed air pressure
Max. cutting thickness (mm)
Weight (Kg)
Size (mm ) ( L×W×H )
Made in China
NTRODUCTION
NOTE:
Your plasma cutting unit is fitted with sophisticated safeguards which
block functioning and therefore the cutting operations until all the safety conditions are
present. The plasma cutting technique requires dangerously high voltage for pilot arc
starting and during cutting, therefore the following safety rules must be observed with
great care:
240V AC ±10%
50/60
6
230
20-40
96
30% @ 40AMPs / 100% @ 25AMPS
85
0.93
B
IP23
Contact Arc Starting (HF)
90
4.8 bar
10
12
371×155×295
UNI FLAME AUTOLIFT