Instruction manual

CAUTION:
Do not point the torch jet at foreign bodies
CAUTION:
Avoid unnecessary lighting of the pilot arc to prevent excessive consumption of the
electrode and nozzle.
CAUTION:
During cutting the speed of the torch movement should be in accordance with the thick-
ness of the piece to be cut. Excessive speed causes a return of incandescent towards
the torch which shortens the life of the parts of the torch most subject to wear and tear.
The build-up of scale on the nozzle should be removed as soon as possible.
UNI FLAME AUTOLIFT
REGULATOR INSTALLATION
AIR REGULATOR
Attach to fitted mounts
on the back of the
machine.
see figure below.
attach quick release plug
to connector socket
see figure below.