Service manual

Edition 101222
-- 39 -- s2Cad160
Welding gun
S Cleaning and replacement of the welding gun’s wear parts should take place at
regular intervals in order to achieve trouble--free wire feed. Blow the wire guide
clean regularly and clean the contact tip.
Changing the wire liner
A.
Loosen the fixing screw and take the roller off the axle.
B.
Loosen the adaptor nut, straighten the torch and remove the liner.
C.
Insert the replacement liner into the straightened torch until it touches the contact tip.
D.
Lock the liner with adaptor nut. Cut excess of liner so it sticks 7mm out of adaptor
nut.
ORDERING OF SPARE PARTS
Spare parts may be ordered through your nearest ESAB dealer, see the last page of
this publication.