Specifications

12
12
Wire Spool Adjustment
Fig 4
1. Wire reel retainer
This screws onto wire reel holder to secure wire reel roll
2. Wire reel tensioner nut
This adjusts the tension on wire feed reel which stops the reel from over running and causing
wire to come of reel (birds nest) when torch switch is released. Some times known as reel
brake.
This is set in factory, if adjustment is required do not over tighten as this can cause stress to
wire feed motor.
Fig 5
1. Wire Feed Drive Assy
Make sure rollers are correct size for wire diameter selected, to change rollers release
retaining knurled head screw fit rollers onto shafts making sure the right size groove is in
line with wire and refit retaining screws.