User Manual

ManualsBrandsR-tron ManualsElectronicsWireless Booster

R-tron Proprietary & Confidential Page 1

Issue: 1.0

RSN-iDEN-25-DC

Manual

R-tron I nc.

Summary of content (24 pages)

PAGE 1
RSN-iDEN-25-DC Manual R-tron I nc. R-tron Proprietary & Confidential Page 1 Issue: 1.
PAGE 2
Safety Precautions Opening the iDEN MINI could result in electric shock and may cause severe injury. Warning Connect the equipment frame ground to building ground. Warning Safety Precautions Warning Operating the iDEN MINI with antennas in very close proximity facing each other could lead to severe damage to the Booster. Caution RF EXPOSURE INFORMATION A minimum separation distance of 7.
PAGE 3
System Manual RSN-iDEN-25-DC 1. Introduction Server antenna port Ground contact Donor antenna port 800MHz UL Output -30dB CPL 900MHz DL Output -30dB CPL Alarm LEDs Local port Remote port AC in and Switch Modem Ant DC Outlet for external device 900MHz UL Output 800MHz DL Output -30dB CPL -30dB CPL RSN-iDEN-25-DC Booster is used to fill out uncovered areas in iDEN mobile systems, such as base station fringe areas, road tunnels, business and industrial buildings, etc.
PAGE 4
System Manual RSN-iDEN-25-DC which can communicate with the Booster. Remote operation can be performed. RSN-iDEN-25-DC Booster work as bi-directional amplifiers. A Booster receives, amplifies, and retransmits signals inbound and outbound simultaneously, i.e. from the base station via the Booster to the mobile stations and from the mobile stations via the Booster to the base station.
PAGE 5
System Manual RSN-iDEN-25-DC 2. System Design 2.1 RSN-iDEN-25-DC Specification 2.1.1 Mechanical Specification Parameter Specification RF Ports N-female x 2, SMA-female x 5 Size 13.98 X 14.37 X 7.62(inch), 355 X 365 X 193.5(mm) Weight 17.154Kg(37.82lbs) MADE IN KOREA : R-tron lnc. MAKER PRODUCT PART NUMBER : RSN-iDEN-25-C : 110 -125Vac , 60Hz , 2A POWER COMPLIES WITH PART 90, FCC RULES. FCC REG. NO. : STESNIDEN25C SERIAL NO. / DATE : E258109 I.T.
PAGE 6
System Manual RSN-iDEN-25-DC 2.1.2 Electrical & Environmental Specification A. Spectrum Characteristics Parameter iDEN 800 iDEN 900 Operating DL 851MHz - 869MHz 935MHz ~ 940MHz Frequency UL 806MHz ~ 824MHz 896MHz ~ 901MHz ≥ 65dBc Roll off characteristics DL & UL @±500kHz from each edge of operating band (in all temperature) ≤ 2.5dB (in all temperature) Flatness Gain DL & UL 50dB to 80dB(in all temperature) Delay DL & UL 8.0µs Max. VSWR DL & UL 1.5 Max.

PAGE 7

System Manual RSN-iDEN-25-DC B. Environmental specification Item Standard Power supply Operating temperature Humidity 110V~125V, 60Hz -10℃ ~ 50℃ 95 % Remark

System Features R-tron Proprietary & Confidential Page 6 Issue: 1.

System Manual RSN-iDEN-25-DC 2.2 Sub Unit Overview RSN-iDEN-25-DC is composed of the following sub units: UDC(Up Down Converter) HPAs(High Power Amplifiers) Multiplexers Main Control Unit (MCU) Power Supply Unit (PSU) EMI Filter PSU MCU UDC UL HPA DL HPA Multiplexers EMI Filter R-tron Proprietary & Confidential Page 7 Issue: 1.

PAGE 9

System Manual RSN-iDEN-25-DC 2.2.1 Block diagram The following, Figure explains how the RSN-iDEN-25-DC serves signals. 2.2.2 UDC Modules The UDC Module is basically a bi-directional amplifier that sharply filters out unwanted noise. R-tron Proprietary & Confidential Page 8 Issue: 1.

PAGE 10

System Manual RSN-iDEN-25-DC 2.2.3 Multiplexers R-tron Proprietary & Confidential Page 9 Issue: 1.

PAGE 11

System Manual RSN-iDEN-25-DC 2.2.4 Main Control Unit (MCU) MCU is the control unit of RSN-iDEN-25-DC. It controls and monitors operational parameters. It also generates alarms, an event log and many other functions of the RSN-iDEN-25-DC. J10 J9 *Pin Map* Port Connected to J6 MCU Vcc(+12V) J7 - J8 PSU Alarms / Status LEDs J9 iDEN 900 J10 iDEN 800 P1 Local P2 Remote R-tron Proprietary & Confidential Page 10 Issue: 1.

PAGE 12

System Manual RSN-iDEN-25-DC 2.2.5 Power Supply The Power Supply Unit (PSU) supplies a steady DC power to RSN-iDEN-25-DC by drawing power from the general in-wall AC outlets *Specification* Item Specifications Operating Temp -10℃~ 50℃ Humidity 5%~95% Cooling method Convection Environmental Voltage AC110~125V Current 4A Max / 6.5V, 12V, -12V , 27VDC Frequency 60Hz typ Leakage Current 0.5mA max.@110V AC R-tron Proprietary & Confidential Page 11 Issue: 1.

PAGE 13

System Manual RSN-iDEN-25-DC 2.2.6 High Power Amplifiers (HPAs) The High Power Amplifiers the transmitted signal from a base station at the final stage of the Booster and vice versa. R-tron Proprietary & Confidential Page 12 Issue: 1.

PAGE 14

System Manual RSN-iDEN-25-DC 2.2.6 EMI Noise Filter 2.2.7 Communication & LED Board R-tron Proprietary & Confidential Page 13 Issue: 1.

PAGE 15

System Manual RSN-iDEN-25-DC * Hardware Installation 1. Setting for Command and Control * iDEN MINI operates on a customer provided PC based platform with the following system requirements. Windows® XP Strong recommended 128 MB RAM or more Pentium Ⅲ processor or more keyboard RJ-45 jack Step 1 Open My Network Places. Step 2 Click the “View network connections”. R-tron Proprietary & Confidential Page 14 Issue: 1.

PAGE 16

System Manual RSN-iDEN-25-DC Step 3 Push the right button of mouse and select the properties. Step 4 Click the properties of TCP/IP. R-tron Proprietary & Confidential Page 15 Issue: 1.

PAGE 17

System Manual RSN-iDEN-25-DC Step 5 Set the values and OK as the following. Close all windows. Step 6 Open a new explorer window. R-tron Proprietary & Confidential Page 16 Issue: 1.

PAGE 18

System Manual RSN-iDEN-25-DC Step 7 Type http://192.168.0.1:83 in the address box and press “Enter” key. Step 8 Login with “administrator” of ID and “1234” of password and “OK”. R-tron Proprietary & Confidential Page 17 Issue: 1.

PAGE 19

System Manual RSN-iDEN-25-DC 2. Command and Control on the Web GUI. A. iDEN 800. a. To control the iDEN 800, check the box of iDEN 800. b. The operating bandwidth, 18MHz-bandwidth and 7MHz-bandwidth, is possibly selected. Select the operating bandwidth and push the “APPLY” and check the bandwidth. R-tron Proprietary & Confidential Page 18 Issue: 1.

PAGE 20

System Manual RSN-iDEN-25-DC c. The operating frequency is able to be selected. Select the operating frequency and push the “APPLY” and check the bandwidth and frequency. R-tron Proprietary & Confidential Page 19 Issue: 1.

PAGE 21

System Manual RSN-iDEN-25-DC B. iDEN 900. a. To control the iDEN 900, check the box of iDEN 900. b. On the iDEN 900, 5MHz-bandwith is only available. Select the operating frequency and push the “APPLY” and check the bandwidth and frequency. R-tron Proprietary & Confidential Page 20 Issue: 1.

PAGE 22

System Manual RSN-iDEN-25-DC C. DL and UL gain setting. a. Set the DL gain and UL gain, 50dB to 80dB, and push the “APPLY” button. * Set the gain of iDEN 900 as same as the iDEN 800 gain setting. R-tron Proprietary & Confidential Page 21 Issue: 1.

PAGE 23

System Manual RSN-iDEN-25-DC D. HPA on and off. a. Press the “ON” and “OFF” and check the status. The maximum output power for operating is +25dBm on both DL and UL. R-tron Proprietary & Confidential Page 22 Issue: 1.

PAGE 24

System Manual RSN-iDEN-25-DC * Reference The Operating Bandwidth & Frequencies Bandwidth Operating Frequency 851~869MHz Downlink 851~868.8MHz 851~868.6MHz 18MHz-bandwidth 806~824MHz Uplink 806~823.8MHz 806~823.6MHz iDEN 800 862~869MHz Downlink 862~868.8MHz 862~868.6MHz 7MHz-bandwidth 817~824MHz Uplink 817~823.8MHz 817~823.6MHz 935~940MHz Downlink iDEN 900 935~939.8MHz 935~939.6MHz 5MHz-bandwidth 896~901MHz Uplink 896~900.8MHz 896~900.