User's Manual

18 / 36
User Manual
Rev. 2.3 - 26/06/19
PTRL-LCD & RXRL-LCD
ELETTRONICA
The values indicated are “readings”, and therefore cannot be modified (remark
the empty triangle). In order to modify the power setting, use the predefined menu
as described formerly.
5.4.3 Power Amplifier menu (P.A)
This view, composed of three lines that can be scrolled with the ’UP’ and ’DOWN’
buttons, shows to the user the values corresponding to the power amplifier of the
unit:
• Voltage (VPA)
• Absorbed current (IPA)
5.4.4 Set menu (Set)
This menu enables to read and set the working frequencies.
When you press the ENTER button, it will be possible to modify the setted frequency
with the ’UP’ (the frequency increases) and ’DOWN’ (the frequency decreases).
After a new frequency value was setted, press the ENTER button to confirm the
choice; the exciter will unlock from the current frequency (the LED LOCK switches
off) and will lock to the new working frequency (the LOCK LED lits up). On the
contrary when you press ESC or when you let the timeout passes by, the frequency
will remain setted at the last value memorized.