User's Manual

20 / 54
User Manual
Rev. 2.1 - 26/06/19
TEX1002LCD
• Preemphasis:
ON
1
2
3
4
50 ms
ON
1
2
3
4
75 ms
• L and R (XLR type) input impedance:
Switch 1: R XLR input impedance, ON = 600 W, OFF = 10 kW
Switch 2: L XLR input impedance, ON = 600 W, OFF = 10 kW
• MPX input operation mode/impedance:
Switch 1: Mode of operation ON = Mono, OFF = Stereo
Switch 2: MPX input impedance, ON = 50 W, OFF = 10 kW
5.2 Operation
1) Power on the transmitter and ensure that thePower on the transmitter and ensure that the ON light turns on. Equipment
name should appear briefly on the display, quickly followed by modulation
and forward power readings, provided that the transmitter is delivering output
power..
Menu 1
1b) In case of a password has been set, through the Miscellaneous menu, enterIn case of a password has been set, through the Miscellaneous menu, enter
the code and then confirm to be able to view or modify the parameters of the
machine.
The screen that is shown is similar to the following:The screen that is shown is similar to the following::
Menu 2
NOTE: It is advisable to write down the password set, if you forget the
password it is not possible to recover it automatically. To recover the
password, contact Customer Service by sending the alphanumeric PUK code
of 6 characters generated automatically when entering the password.
ON
1 2
ON
1 2