User's Manual

20 / 36
User Manual
Rev. 2.0 - 26/06/19
TEX100LCD/S
ELETTRONICA
should appear briefly on the display, quickly followed by modulation and
forward power readings (Menu 1), provided that the exciter is delivering output
power.
Menù 1
1b) In case of a password has been set, through the Miscellaneous menu, enterIn case of a password has been set, through the Miscellaneous menu, enter
the code and then confirm to be able to view or modify the parameters of the
machine.
The screen that is shown is similar to the following::
Menu 2
NOTE: It is advisable to write down the password set, if you forget the
password it is not possible to recover it automatically. To recover the
password, contact Customer Service by sending the alphanumeric PUK code
of 6 characters generated automatically when entering the password.
1c) To modify power level setting, hold down the ENTER button until opening
the power setup menu.
The edit screen will look like this:
Menu 3
Next to SET indication, a bar provides a graphic display of preset output power.
The filled portion of the bar is proportional to set power level.
Example
100% output power Full bar
≅ 100W output
(mod.TEX100LCD/S)
25% output power 1/4 bar
≅ 25W output
(mod.TEX100LCD/S)