User's Manual

TEX100LCD/S
ELETTRONICA
27 / 36
User Manual
Rev. 2.0 - 26/06/19
Note that these are readings, rather than settings, and cannot be edited (note the
empty arrow).
Rel Firmware release information.
Dat Release date.
Tab Shows table loaded in the memory.
5.3.7 Channels Menu (L&R)
Right and left channel input levels are displayed as horizontal bars as shown in
the figure below.
The bar meter reflects the level corresponding to a 100% deviation for each channel
and provides a convenient reference when setting audio channel input levels.
Menu 11
L Left channel Vmeter.
R Right channel Vmeter..
5.4 Optional Function
A range of options is available for the product to add certain functions and/or modify
existing functions. Outlined below are the functions available at the moment, which
must be specified on order to R.V.R. Elettronica.
5.4.1 FSK Option
The FSK function generates periodic carrier frequency shifts to generate a
Morsecoded station ID code.
NOTE: This function is typically used in the USA.
The factory setting for frequency shift is +10KHz and code repetition period is 60
minutes (please contact R.V.R. Elettronica if you need different settings), whereas
station identified may be programmed by the user following the indications provided
in section below.
When the FSK option is fitted, an FSK submenu is added to the selection
menu.