User's Manual

TEX30LCD/S
ELETTRONICA
35 / 44
User Manual
Rev. 2.1 - 26/06/19
A
• Unscrew the four screws B and remove the malfunctioning blower.
B
• Insert the new blower (mod. AD0824UB-A71GL Adda Corporation or
KDE2408PTV1.13.MS SUNON) and retighten the four fixing screws B.
• Reconnect the connector in the position A of power supply, and reassemble it
in its housing.
• Replace the cover and tighten all the screws necessary to close it.
8.4 Module substitutions
Only authorized and qualified technical personnel must be proceed with the
replacement of the component parts in the relevant device.
8.4.1 How to replace the power supply
• Open the top cover of TEX30LCD/S by unscrewing all the screws.
• Identify the power supply module to be replaced.
• Unscrew all the points A with the help of an Allen screwdriver.