User's Manual
TEX30LCD/S
ELETTRONICA
39 / 44
User Manual
Rev. 2.1 - 26/06/19
8.4.4 How to replace the panel board
• Unscrew the four screws A on the front panel of the TEX30LCD/S.
A
• Disconnect all the connectors B.
B
• Remove the panel board and replace it with a new spare part.
• Redo all previously steps, performed in reverse, in order to reassemble and fix
the module in place.
• Put the cover back on and tighten all the screws necessary to close it.