User's Manual

20 / 36
User Manual
Rev. 2.0 - 26/06/19
TEX702LCD
ELETTRONICA
The screen that is shown is similar to the following::
Menu 2
NOTE: It is advisable to write down the password set, if you forget the
password it is not possible to recover it automatically. To recover the
password, contact Customer Service by sending the alphanumeric PUK code
of 6 characters generated automatically when entering the password.
1c) To modify power level setting, hold down the ENTER button until opening
the power setup menu.
The edit screen will look like this:
Menu 3
Next to SET indication, a bar provides a graphic display of preset output power.
The filled portion of the bar is proportional to set power level.
Example
100% output power Full bar
≅ 700W output
(mod.TEX702LCD)
25% output power 1/4 bar
≅ 175W output
(mod.TEX702LCD)
The bottom line provides instantaneous power reading, press button to increase
level, press to decrease it. When you have achieved the desired level, press
ENTER to confirm and exit the default menu. Please note that the setting is stored
automatically; in other words, if you press ESC or do not press any keys before
the preset time times out, the latest power level set will be retained.
NOTA: This feature prevents the equipment from delivering maximum powerThis feature prevents the equipment from delivering maximum power
as soon as output is enabled from menu 4, or in the event the equipment is
already set to ON when you energise it.
2) Ensure that the equipment is not in a locked-out state. Press ESC to call up
the selection screen (menu 3). Highlight Fnc and press ENTER to confirm and
access the selected menu (menu 4).