User's Manual

TEX702LCD
ELETTRONICA
3 / 36
User Manual
Rev. 2.0 - 26/06/19
4. General Description
The TEX702LCD, manufactured by R.V.R. Elettronica, is a transmitter for
Frequency Modulated audio broadcasting in a frequency modulation able to
transmit in the band between 87.5 and 108 MHz, in step of 10 KHz, with an RF
output power adjustable up to a maximum of 700 W into a 50 Ohm standard
load.
The unit is factory aligned and calibrated at the time of manufacture. Because of
this manufacture process, there is no field tune-up or alignment necessary.
Factory tolerances are:
- Maximum Output Rated Power: 58,45 dBm ±1 dB
- Gain: Not Applicable (the equipment is supplied without a radiant system, that
shall be borne by the customer).
The TEX702LCD are designed to being contained into a 19” rack box of 2HE.
4.1 Unpacking
The package contains:
1 TEX702LCD
1 User Manual
1 Mains power cables
The following accessories are also available from Your R.V.R. Dealer:
• Options for the machine
• Spare parts
• Cables
4.2 Features
The overall efficiency of TEX702LCD is better than 70% across the bandwidth,
for this reason is part of RVR Green Line family.
This performance characteristic is guaranteed in a range between +0.25 dB and -3
dB (+5% and -50%) referred to the nominal power of the equipment: for example
from 350W to 735W in case of TEX702LCD; outside these limits the equipment
is able to work properly but can not guarantee an efficiency of 70%.
This transmitter contain a low-pass filter that reduces the harmonic emission to
provided for by international standards (CCIR, FCC or ETSI) and can be connected