Specification

STL200HB
Need help? Tech help line: [phone] Email: [e-mail] Website: www.rablighting.com
Copyright © 2020 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice
Page 1 of 2
STEALTH Sensor with twin precision die cast HB101 Bullet floods pre-wired and
assembled on universal CU4 cover plate. Accepts PAR38 lamps, 150 Watt max.
Lamps not supplied.
Color: Bronze Weight: 5.0 lbs
Project: Type:
Prepared By: Date:
Technical Specifications
Listings
UL Listed:
Suitable for wet locations
Electrical
Power Consumption:
1W
Surge Protection:
Withstands up to 6000 volts
Wall Switch Manual Override:
Two flip logic prevents activation by momentary
power outages. Override resets to auto at dawn.
No extra wiring needed.
RF Immunity:
Circuits fully shielded for maximum radio
frequency immunity
Voltage:
120 Volts AC 60 Hertz
Switching Capacity:
1000 watts incandescent @ 120 volts, 8 amps
Sensor Specifications
Time Adjustment:
5 seconds to 12 minutes
Wide Sensitivity Control:
Adjustable from 100% to 30%
Advanced Detection Logic:
Minimizes false triggers
Photoelectric Control:
Deactivates lights during daylight. Fully
adjustable for 24 hour operation or custom
applications.
Detection:
200° view
Construction
Temperature Compensation:
Sensitivity adjusts automatically for consistent
detection in hot and cold ambient temperatures
Horizontal Lock, No-tool Joints:
Keeps sensing pattern level for fast, error-free
installation