Cut Sheet

FNH6 6” HOOD

Note: These instructions do not cover all details or variations in equipment

nor do they provide for every possible situation during installation, operation

or maintenance.

Thank you for buying RAB lighting xtures. Our aim is to design the

best quality products to get the job done right. We’d like to hear your

comments. Call the Marketing Department at 888-RAB-1000, or email:

marketing@rabweb.com

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE

INSTRUCTIONS FOR FUTURE REFERENCE.

RAB xtures must be wired in accordance with the National Electrical

Code and all applicable local codes. Proper grounding is required for

safety. This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and operation

of the product and the hazards involved.

WARNING: Make certain power is OFF before installing or

maintaining xture.

02/08

Wire Guard (GDFN) can be used

with hood as shown.

(4) Screws

Installation

6” Hood mounts with

(4) #10-24 x 3/8” stainless

steel screws to door as shown.

Screws are provided with hood.

CLEANING

Clean glass lens with nonabrasive glass cleaning solution.

CAUTION: Be sure xture temperature is cool enough to

touch. Do not clean or maintain while xture is energized.

Easy Installation & Product Help

PAGE 1
® FNH6 6” HOOD Thank you for buying RAB lighting fixtures. Our aim is to design the best quality products to get the job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: marketing@rabweb.com IMPORTANT READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety.
PAGE 2
® FNH6 6” HOOD Thank you for buying RAB lighting fixtures. Our aim is to design the best quality products to get the job done right. We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: marketing@rabweb.com IMPORTANT READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety.