Cut Sheet

LOSBAY800
Need help? Tech help line: [phone] Email: [e-mail] Website: www.rablighting.com
Copyright © 2021 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice
Page 1 of 2
Available accessories include polyshield and wire guards, replacement lens and
frame, and an occupancy sensor.
Weight: 0.8 lbs
Project: Type:
Prepared By: Date:
Technical Specifications
Other
Description:
High Bay occupancy sensor for use with
BAYLED, AISLED and RBAY fixtures.
Warranty (Years):
5-years
Buy American Act Compliance:
RAB values USA manufacturing! Upon request,
RAB may be able to manufacture this product to
be compliant with the Buy American Act (BAA).
Please contact customer service to request a
quote for the product to be made BAA
compliant.
Construction
Mounting Height:
Up to 40 ft
Operating Temperature:
0°C to 70°C (32°F to 158°F)
Relative Humidity:
5-95% non condensing
Sensor Specifications
Time Delay Setting:
5 seconds to 30 minutes
Electrical
Rating:
120VAC thru 347VAC, 50/60 Hz
Maximum Load:
120VAC, 60Hz: 0-1000VA, 1/4 hp, 230VAC,
50/60Hz: 0-1000VA, 277VAC, 60Hz: 0-1200VA,
1/4 hp, 347VAC, 60Hz: 0-1500VA, 1/4 hp.
Compatible with tungsten, electronic and
magnetic ballasts, fluorescent and LED.
Photocell:
1-300fc Light level adjustable setting
Fluorescent Switching Capacity:
6.67 Amps, 785 Watts CFL @ 120 Volts 0.98pF
T5HO ballast; 4.33 Amps, 1175 Watts LED @
277 Volts 0.98pF T5HO ballast.
Power Consumption:
0.2W
Optical
Coverage Pattern:
360° White Lens (installed) - 100 ft. diameter
when mounted at 40 ft., Aisle Lens (included as
option) - 100 ft. x 50 ft. wide.