Cut Sheet

SEAL4-50/D10
Need help? Tech help line: [phone] Email: [e-mail] Website: www.rablighting.com
Copyright © 2021 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice
Page 1 of 2
This economical linear LED washdown fixture is ideal for canopies, loading docks,
tunnels, stairwells and other hard-to-reach areas where relamping is difficult and
costly.
Color: White Weight: 8.7 lbs
Project: Type:
Prepared By: Date:
Driver Info
Type Constant Current
120V 0.44A
208V 0.26A
240V 0.23A
277V 0.19A
Input Watts 49.1W
LED Info
Watts 50W
Color Temp 5000K (Cool)
Color Accuracy 82 CRI
L70 Lifespan 50,000 Hours
Lumens 5,849
Efficacy 119.1 lm/W
Technical Specifications
Compliance
UL Listed:
Suitable for wet locations
IESNA LM-79 & LM-80 Testing:
RAB LED luminaires and LED components have
been tested by an independent laboratory in
accordance with IESNA LM-79 and LM-80.
DLC Listed:
This product is on the Design Lights Consortium
(DLC) Qualified Products List and is eligible for
rebates from DLC Member Utilities. DLC Product
Code: PRTHPOQN
LED Characteristics
LEDs:
Long-life, high-efficacy, surface-mount LEDs
Color Uniformity:
RAB's range of Correlated Color Temperature
follows the guidelines of the American National
Standard for Specifications for the Chromaticity
of Solid State Lighting (SSL) Products, ANSI
C78.377-2017.
Performance
Lifespan:
50,000-Hour LED lifespan based on IES LM-80
results and TM-21 calculations
Construction
IP Rating:
Ingress protection rating of IP65 for dust and
water (suitable for damp locations only when
installed with Lightcloud Sensor)
Housing:
Impact-resistant polycarbonate with stainless
steel door clips. 1/2" opening/ drill out (drill out
by customer) for conduit and bushing/cord
entry.Click here for a detailed list of damaging
chemicals.
Mounting:
Quick-mount, stainless steel snap on brackets
supplied for surface mounting. V-Hook brackets
supplied standard for suspending the fixture.
Lens:
Diffuse polycarbonate lens for low glare and
maximum protection
Gaskets:
High-temperature silicone gaskets
Cold Weather Starting:
The minimum starting temperature is -20°C
(-4°F)
Maximum Ambient Temperature:
Suitable for use in up to 40°C (104°F)
Installation:
Tether Cables are provided for easy installation.
Quick connector may be used for quick and
easy wiring.