Technical data

Publication No. 980673-024 Rev. A 1260-37 User Manual
Astronics Test Systems Module Specification 1-1
Chapter 1
MODULE SPECIFICATION
1260-37 Module
Specification
The 1260-37 switch module consists of two switch circuits; a 1 x
48 Signal Multiplexer/Scanner and a 40-
Channel SPDT Switch.
The Signal Multiplexer circuit switches two lines per channel, and
has the capability of being configured as one 1 x 48 multiplexer,
two 1 x 24 multiplexers, four 1 x 12 multiplexers, or eight 1 x 6
multiplexers. The signal mulitplexer configuration is user
selectable, but is supplied from the factory in the one 1 x 48 two-
wire mode. In addition, the multiplexer may be configured as a
one-
wire 1 x 96 multiplexer. A block diagram of this circuit is
shown in Figure 3-1. The 40 channel SPDT switch circuit provides
40 independent channels of switching. Each channel features one
common line that connects to either a normally open or normally
closed position. A block diagram of this circuit is shown in Figure
3-2.
Figure 1-1, 1260-37 Switching Card