User's Guide
Table Of Contents
- VBOX Indoor Positioning System User Guide
- 01 - VBOX IPS Introduction
- 02 - VBOX IPS Hardware Installation
- Rover (VIPS-R-V2) Installation
- 03 - VBOX IPS Rover Connection to VBOX 3i
- 04 - VBOX IPS Site Configuration
- Upload to Beacon
- 05 - VBOX IPS Using with a VBOX 3i/Standalone
- 06 - VBOX IPS Troubleshooting
- VBOX IPS - PIN OUTS
- VBOX IPS - Technical Specification
- VBOX IPS - Upgrading Firmware
- VBOX IPS - Regulatory Information
06 - VBOX IPS Troubleshooting
Upload Timeout
When uploading the VBOX IPS configuration, the process may time out. If this occurs, there are a number of things that
can be changed to solve the issue, other than repeated attempts.
1. The first is to increase the Timeout number within the VIPS Site Configuration Software. Increasing this number
will increase the amount of time that passes before communication times out.
2. The second option is to ensure that the USB transfer Sizes are set to the maximum of 4096 on both receive and
transmit. This is configured under the Advanced options of the Port Settings.
https://racelogic.support/01VBOX_Automotive/VBOX_Indoor_Positioning_System/VBOX_IPS_User_Guide/
20