User's Guide
Table Of Contents
- VBOX Indoor Positioning System User Guide
- 01 - VBOX IPS Introduction
- 02 - VBOX IPS Hardware Installation
- Rover (VIPS-R-V2) Installation
- 03 - VBOX IPS Rover Connection to VBOX 3i
- 04 - VBOX IPS Site Configuration
- Upload to Beacon
- 05 - VBOX IPS Using with a VBOX 3i/Standalone
- 06 - VBOX IPS Troubleshooting
- VBOX IPS - PIN OUTS
- VBOX IPS - Technical Specification
- VBOX IPS - Upgrading Firmware
- VBOX IPS - Regulatory Information
Brake Stop Accuracy (Trigger activated)
Accuracy 5 cm**
Definitions
* Circle of Error Probable (CEP): 95 % of the time the position readings will fall within a circle of the stated diameter
** Based on <50 m brake stop distance
^ Subject to accurate site survey and installation
UWB Radio
Frequency 4.0 – 5.0 GHz or 6.0 – 7.0 GHz
Transmit power (peak / average) 0 dBm / -41.3 dBm
Outputs
Rover
RS232 Output
RS232 Port 1 Position and velocity
RS232 Port 2 IMU04 data
Output data rate 100 Hz
https://racelogic.support/01VBOX_Automotive/VBOX_Indoor_Positioning_System/VBOX_IPS_User_Guide/
28