User's Guide
Table Of Contents
- VBOX Indoor Positioning System User Guide
- 01 - VBOX IPS Introduction
- 02 - VBOX IPS Hardware Installation
- Rover (VIPS-R-V2) Installation
- 03 - VBOX IPS Rover Connection to VBOX 3i
- 04 - VBOX IPS Site Configuration
- Upload to Beacon
- 05 - VBOX IPS Using with a VBOX 3i/Standalone
- 06 - VBOX IPS Troubleshooting
- VBOX IPS - PIN OUTS
- VBOX IPS - Technical Specification
- VBOX IPS - Upgrading Firmware
- VBOX IPS - Regulatory Information
Beacon
Unit Power
Input voltage range 6.5 – 30 V DC
Power consumption 2 W
Rover IMU Specifications
Gyroscopes (Angular rate
sensors)
Accelerometers
Dynamic range ±450°/s ± 20 g
Nonlinearity 0.01 % of full scale 0.1 % of full scale
Resolution 16-bit ADC (0.014°/s) 16-bit ADC (0.15 mg)
Bandwidth 50 Hz 50 Hz
Noise density 0.01°/s/√Hz 60 µg/√Hz
Bias stability 0.003°/s 15 µg
Bias repeatability (1 year) 0.2°/s 0.005 g
Environmental and Physical
IP rating IP 67
Operating temperature -30°C to +60°C
Storage temperature -40°C to +85°C
Size (of each beacon/rover) 124 x 124 x 74.5 mm (l x w x h)
Weight (of each beacon/rover) 350 g
https://racelogic.support/01VBOX_Automotive/VBOX_Indoor_Positioning_System/VBOX_IPS_User_Guide/
30