Introduction Bluetooth profile K-6 gives an implementation guideline for Bluetooth headset application, which includes two functionalities: Bluetooth headset and Bluetooth audio gateway. Generally headset profile will be implemented in earpiece, and audio gateway will be implemented in cellular phone, PBX or the other kind of communication device, Race wood has developed a fully Bluetooth V1.1 compliant headset. This manual will serve as a basic instruct for our customers who want to use our headset.
between) Charging The headset comes with a build-in rechargeable battery. The battery is not fully charged when you buy the headset. We recommend that you charge the headset until the LED light displays green before using it for the first time. ® To remind you that you will soon need to recharge the battery, the headset LED light flashes red when the headset takes 2~2.
Step 6: When asked headset password, please enter the headset password “1234” and press accept key or its equivalent. When pairing has been completed, the headset LED no displays. Step 7: The Headset is in stand-by made. Adjusting the volume You can adjust the headset earpiece volume during a call. ® To increase the volume, press the © bunion. ® To decrease the volume, press the € button, Wearing and positioning the headset Once the headset and the other device are set up: ® Place the earpiece in your ear.
Answering calls Using the (J button to answer a call ® When the headset rings, press the (J button. Note: If the phone rings first, wait unit the headset rings, then press the (J button. ® End of the call by pressing the O button. Answering a second call #® You have to use the phone keypad to answer and handle a second call, but you can tll use the headset for talking and listening. You can’t usc the headset buttons during a second call.
The headset and the device you are using with it have to be paired to recognize each other. They also have to be within range of each other. During pairing it is recommended that the headset and the device you are using it with are no more than 1 meter apart, with no solid objects in between. The headset LED displays flushes red This indicates that the headset has only limited talk and standby time left. Charge the headset battery for approximately 2 to 2.