USER'S MANUAL KVM Switch RKP21x-208KVM, RKP241x-208KVM

Rev. JUL-02
FAQ – Sun Server
 Sun Server are using resolution at 1152 x 900 x 76Hz
 Supported resolution mode
 640 x 480 x 70/75Hz
 800 x 600 x 70/75Hz
 1024 x 768 x 70/75Hz
 1280 x 1024 x 75Hz (17” LCD)
 Note the Max. frequency of 13.3” is 70Hz
 You need to change the Sun Server resolution before you connect to LCD
Display
 Please do the following procedure to change the resolution setting :
1. as root:
you may find the following comment “/user/sbin/m64config”
2. Type “/user/sbin/m64config – prconf”
to view current resolution
3. Type “/user/sbin/m64config – res 1024x768x70 now”
to change to 1024x768 @ 70MHZ
4. the screen will be rubbish
5. Then type “pkill Xsun”
6. And Type “pkill Xsession” to restart the Xsession
Remember this process need to RESTART the server
 Under Common Desktop Environment (CDE)
 To change the OpenBoot resolution, you can type the following commend in OK prompt
1. In OK prompt, type “setenv output-device screen:r1024x768x70”
2. Type “printenv” to confirm the resolution has been changed to 1024x768x70Hz
3. Then type “reset” to restart the system
Remember this process need to RESTART the server