dedicated KVM switch and rackmount screen technology User Manual CV-801 PS/2 DB-15 KVM 751 Designed and manufactured by Austin Hughes UM-CV-751-PS2KVM-Q215V1 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part 1 > PS/2 DB-15 KVM CV-401 CV-801 1.1 1.2 1.3 Package contents KVM port connection KVM Cascade 1.4 Specifications P.1 P.1 P.2 P.3 < Part 2 > Usage 2.1 2.2 2.3 2.4 2.5 KVM Button Password KVM OSD KVM Hotkey DC Power Option : 12V / 24V / 48V / 110 ~ 125V UM-CV-751-PS2KVM-Q215V1 P.4 P.5 P.6 P.7 P.8 www.austin-hughes.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Part 1. PS/2 DB-15 KVM < 1.1 > Package Contents PS/2 DB-15 KVM CV-801 KVM unit • CV-801 KVM unit x 1 • Mounting set w/ bracket & screws x 1 • Power cord ( for KVM ) x 1 CV-801 Local Console Power Cascade < 1.2 > KVM port connection CD-6 / CD-10 / CD-15 ■ 6 / 10 / 15 ft PS/2 KVM cable ■ Support PS/2 server PS/2 Servers DB-15 PS/2 KVM port PS/2 Servers UM-CV-751-PS2KVM-Q215V1 P.1 www.austin-hughes.
< 1.3 > KVM Cascade ■ ■ PS/2 DB-15 KVM Cascade up to 8 levels, 64 servers Cascading multiple KVM with CA-6 cascade cable. Cascaded KVMs from level 2 to 8 must be the models of CV-801. When multiple PS/2 DB-15 KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. level 2 to 8).
< 1.
Part 2. Usage PS/2 KVM Usage 2.1 KVM Button Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch finally computer Front Panel - Port LED Indications PS/2 DB-15 KVM 8 ports Bank no. PC port LEDs Channel button Bank button Bank no.
2.2 Password PS/2 KVM Usage The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on number pad) ■ Set your own user name & password 1. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll 2. Select “CHANGE PASSWORD” 3. Enter “00000000” eight zeros in password field (Do not use “0” on number pad) 4. Set your own password in “ENTER NEW PASSWORD” field 5. Retype your own new password in “RETYPE NEW PASSWORD” field Lock + Space Bar Remark: a.
2.
2.4 KVM Hotkey PS/2 KVM Usage Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock + PgUp Switch to previous bank Scroll Lock + Scroll Lock + Bank no. + Port no.
2.5 Options : DC Power Model PS/2 KVM Usage 12V 24V 48V 110 ~ 125V Input rating Input voltage: 12-Volt 24-Volt 48-Volt 110-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160V - No load 50 mA 50 mA 50 mA 40 mA - Full load 4950 mA 2450 mA 1220 mA 993 mA Output voltage: 12-Volt 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.16A 8.