NVR8008X Enterprise Rack Mount NVR 8-Bay, up to 100-Channel Megapixel Recording, RAID Storage User’s Manual Copyright © EverFocus Electronics Corp, Release Date: December, 2014 Notice: The content is subject to change without notice.
EVERFOCUS ELECTRONICS CORPORATION NVR8008X User’s Manual 1995-2014 EverFocus Electronics Corp www.everfocus.com All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the EverFocus Electronics Corporation. Release Date: December, 2014 QuickTime is a registered trademark of the Apple Computer, Inc. Windows is a registered trademark of the Microsoft Corporation.
Safety Precautions It is strongly recommended to use the Local Display only for short-term operation, such as system configurations. To ensure better system efficiency, the Local Display is not recommended for long term operation or video monitoring. Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation openings or slots on the cover. Do not drop metallic parts through slots.
Heed Warnings All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions All operating and use instructions should be followed. Cleaning Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or aerosol cleaners. Use a damp cloth for cleaning Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards.
ATTENTION! This is a Class A product which may cause radio interference in a domestic environment; in this case, the user may be urged to take adequate measures. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TABLE OF CONTENTS 1. 1.1 1.2 1.3 1.4 1.5 2. 2.1 2.2 2.3 3. 3.1 3.2 3.3 3.4 3.5 4. INTRODUCTION ............................................................................................................. 1 SUPPORTING OPERATING SYSTEMS AND BROWSERS ................................................................. 2 PACKING LIST ..................................................................................................................... 2 OPTIONAL ACCESSORIES ......................................
NVR8008X Enterprise Rack Mount NVR Chapter 1 1. Introduction EverFocus NVR8008X is an enterprise-level NVR, supporting scalable channel numbers from 64 up to 100 channels. Featured with 8-bay hot swappable SATAIII HDDs and RAID 0,1,5,6,10functionality with the highest data protection, the NVR8008X is able to record at 250 Mbps in speed with approximately64 channels working simultaneously at 2-megapixel / 30 fps with H.264 codec without remote playback.
NVR8008X Enterprise Rack Mount NVR 1.1 Supporting Operating Systems and Browsers Operating System: Microsoft Windows XP (32-bit)/ 7 (32/64-bit)/ 8 (32/64-bit) Web Browsers: Google Chrome 1.2 Packing List NVR8008X x1 Power Cord x 1 Quick Guide x 1 HDD. Packed in white boxes Note: 1. Any physical damage to the NVR due to improper installation or handling will not be covered under warranty. 2. Every install environment is different. RAIL MOUNTS are not included with the NVR.
NVR8008X Enterprise Rack Mount NVR 1.3 Optional Accessories Rack Mount Rail x 2 Front Bracket x 2 EKB200 (USB controller keyboard: connect to the PC to control the PTZ cameras connected to the NVR 1.4 Front Panel No. Name 1 HDD Tray 2 USB Description Pull the HDD tray out to install the HDD. 2 USB2.0 ports for connecting to a mouse or external storage device.
NVR8008X Enterprise Rack Mount NVR Power: Indicates the HDDs are installed. HDD R/W: Indicates the HDDs are reading/writing data. 3 Status LED Reset: Use a paper clip to press the reset button. HDD: Indicates the internal HDD 1~8 is activating. Power: Indicates the power is on. LAN1: Indicates the NVR is connected to the network. 4 Power LAN2: Indicates the NVR is connected to the network. Press to turn on / off the NVR.
NVR8008X Enterprise Rack Mount NVR 1.5 Rear Panel No. 1 2 3 Name Power Port USB2.0 Port USB 3.0 Port 4 VGA Port 5 Network Description Connects to the 100-240 VAC~ power using the supplied Power Cord. Two USB2.0 ports Two USB3.0 ports Connects to monitor using a VGA cable. This is for configuration purpose only, not for live viewing of IP camera. Connects to the network using a standard RJ-45 CAT5 10/100Mb Ethernet cable.
NVR8008X Enterprise Rack Mount NVR Chapter 2 2. Installation 2.1 Hard Disk Drive Installation 1. Open the white boxes containing the hard drive.
NVR8008X Enterprise Rack Mount NVR 2. Open the HDD tray by pressing the blue button. 3. Insert the HDD tray into the NVR, and push back the black panel to close it.
NVR8008X Enterprise Rack Mount NVR 2.1.1 Hard Disk Compatibility List Please use the hard disk models recommended in the list below to ensure your hard disks will be compatible.
NVR8008X Enterprise Rack Mount NVR 2.2 Basic Connection The instructions below describe the basic connection for NVR8008X. Before powering on the NVR, make sure the internal HDDs have been installed properly. When you have completed the basic cable connections, you are ready to turn on the NVR. This NVR has dual network ports. It is recommended to separate your IP-camera network from your other network. The diagram below is an example of an initial network set up.
NVR8008X Enterprise Rack Mount NVR Once NVR and IP camera configuration is complete, the DHCP Server/Router and PC-1 can be removed from the Camera Network.
NVR8008X Enterprise Rack Mount NVR 2.3 Checking the Dynamic IP Address You can look up the IP address and access the Web interface of the NVR using the IP Utility (IPU) program, which is contained in the CD. It can also be downloaded from EverFocus’ Website: http://www.everfocus.com/ 1. Save IP Utility Setup AutoRun.exe in your computer. Double click the .exe file and follow the on‐screen instructions. Check Run IPUtility.
NVR8008X Enterprise Rack Mount NVR b. Type the Username and Password. Click the OK button, the status of the selected camera will display Login. Note: 1. The default user ID is admin and the default password is 11111111. 2. If you select more than one NVR that have the same user ID / password, you will be able to log in several NVRs at once. c. Right click the column to configure the setting. Click Apply Changes and save the settings.
NVR8008X Enterprise Rack Mount NVR 4. After reloading the webpage, the login window is displayed again. Type the user ID and password to log in. By default, the user ID is admin, and the password is 11111111. 5. Click the Login button, the Live View window (see 3.2 Live View Window) appears.
NVR8008X Enterprise Rack Mount NVR Chapter 3 3. General Operation You can view the live videos or operate the Live View Window through the Web browser. 3.1 Login / Logout 1. To log in the system, open a Google Chrome Web browser, type the IP address of the NVR in the address field and press the Enter key on the keyboard, the Welcome window pops up. Follow the instruction steps to update the latest Plug-in version. After reloading the webpage, the login window pops up.
NVR8008X Enterprise Rack Mount NVR 3.2 Live View Window No. Name 1 List 2 Menu Tree 3 Group 4 Ratio 5 6 7 8 eMap OSD Display Mode Expand / Collapse Full Screen 9 Option 10 Device Detail 11 Live View Description Click to display the Device List Click to show / hide the Menu Tree of the Device List. Click to configure the Group settings (see 3.2.3.1 Group Settings). Click to switch live video ratio between original (source video) and extended (to the layout screen).
NVR8008X Enterprise Rack Mount NVR 12 13 14 Playback Close Stream Event List 15 Access List 16 IVS 17 Setting 18 Add 19 20 Logout Theme Switch 21 Layout Detail 22 Layout 23 24 25 26 27 28 PTZ Detail PTZ Control Page Detail Page Time Search Digital Zoom / Fisheye Click to enter the playback page for multi-channel playback. Click to disconnect the live streams. Click to enter the Event List setup page. This function is optional. Click to enter the Access Control setup page.
NVR8008X Enterprise Rack Mount NVR 3.2.1 eMap On the Live View Window, click the eMap button, the eMap page appears. 1 No. 1 2 3 4 5 Name List Select Delete Save Clear 2 3 4 Description Click to display the eMap list. Click to select an eMap picture (PNG, JPG, JPEG, GIF, TIFF). Click to delete an eMap. Click to save the settings. Click to clear the eMap settings.
NVR8008X Enterprise Rack Mount NVR 3.2.2 Live View Tool Bar You can use the Live View Tool Bar to control the main / sub streams, local recording, audio, snapshot and playback of the IP camera. On the Live View Window, click the Option button, the Live View Tool Bar appears on the top of the live view cell. No. Name 1 Stream Type 2 Record 3 Audio (Speaker) 4 Snapshot 5 Microphone 6 Quick Playback 7 Close Description Click to switch between main and sub stream.
NVR8008X Enterprise Rack Mount NVR 3.2.3 Device List Setup You can configure and manage the device list using this page. On the Live View Window, click the Device Detail button, the Device List Setup page appears on the right window. No. Name 1 Device Detail 2 Device 3 Group / List 4 Edit / View 5 6 7 Export Load Template Total 8 Device Type List 9 Import 10 Delete 11 Add 12 Device Indicator Description Click to enter the Device List setup page. Click to display the Device List.
NVR8008X Enterprise Rack Mount NVR 3.2.3.1 Group Settings You can configure the group settings on this page. 1. On the Device List setup page, click the Group button, and then click the Group folder on the Group List, the modification icons appears. 2. Click the add node 3. Drag a device from the Device List and drop it to the created group. You can drag multiple devices to a single group. button and enter a name to add a node.
NVR8008X Enterprise Rack Mount NVR 4. Click the Save button to save the settings. 3.2.3.2 Editing Device Configurations To edit the added devices, on the Device List Setup page, click the Edit icon, click the column you want to configure and input the setting. Click the Update button to save the settings. 3.2.3.3 Device Type List You can add devices, image, message or even a Website to the system. On the Device List Setup page, click the Device Type List drop-down list to select a device type. No.
NVR8008X Enterprise Rack Mount NVR 3.2.3.4 Adding Devices You can manually or automatically add devices to the NVR. On the Device List Setup page, click the Add button, the Maintain page appears. Manually Adding a Device Select a device type from the Device Type drop-down list, enter the device information and click the Save button to save the settings. The device will be added to the Device List. Automatically Adding Devices On Figure above, click the 1.
NVR8008X Enterprise Rack Mount NVR 2. Type the device ID and Password in the above columns. 3. Click the 4. Click the Authentication icon, the verified devices will be marked with a check mark. 5. Click the Save button, the device will be listed on the Device List. Apply to Select icon to apply the input ID and Password to the selected devices. 3.2.3.5 Device Indicator The Device Indicator indicates the status of the devices.
NVR8008X Enterprise Rack Mount NVR 3.2.4 Layout Setting You can configure the layout on this page. On the Live View Window, click Layout from the left-side bar, select a layout by clicking on the desired layout, the selected layout should be appeared on the right-side window. To add the devices to the layout cells, on the left-side bar, click Device, drag and drop the devices from the Device List to the layout cells.
NVR8008X Enterprise Rack Mount NVR 3.2.5 Page Setting You can create multiple live view layouts and then save them as pages. Create a layout and then click the Add icon on the Live View Window. The layout will be saved in the Page List as a page. To modified pages, on the Live View Window, click the Page Detail button on the left-side bar and then click the Update button.
NVR8008X Enterprise Rack Mount NVR 3.3 Recording You can set up a weekly recording schedule for the connected devices to record the videos in your computer. The recordings will be saved in AVI files. You have to set up a recording path for the recordings before activating this function (see 3.3.1 Setting up the Recording Path). On the Live View Window, click the Setting button, click the Record & Play menu bar on the left, click Schedule, and the following Schedule page appears.
NVR8008X Enterprise Rack Mount NVR To apply a recording schedule to the desired devices: 1. Click the Device List button, select the desired devices and then click the Save button. 2. Select a desired recording schedule from the Schedule Name List drop-down list and then click the Apply button. 3.3.1 Setting up the Recording Path On the Live View Window, click the Setting button, click the User Setting menu bar on the left, click Local Save Settings, and the following page appears.
NVR8008X Enterprise Rack Mount NVR 3.4 Quick Playback You can play back the Live View recordings of the cameras stored in the client computer using the internal built-in player. On the Live View Window, click the Option button, the Live View Tool Bar appears on the top of the live view cell. Click the Quick Playback button, the playback bar appears on the button of the window. You can control the playback bar on this page.
NVR8008X Enterprise Rack Mount NVR 3.5 Setting You can configure the system settings on this page. On the Live View Window, click the Setting button, a menu bar appears on the left side of the window. Enter each field to configure the settings.
NVR8008X Enterprise Rack Mount NVR 3.5.1 Date / Time On the left-side menu bar, click System Setting and then click Date/Time. Enter the current date and time, and then click the Apply button to save the settings. 3.5.2 License On the left-side menu bar, click System Setting and then click License. Enter the data, and then click the Activate button to activate the license.
NVR8008X Enterprise Rack Mount NVR 3.5.3 User Management You can create multiple user accounts with different privileges using this page. On the left-side menu bar, click User and then click User Management. Click Change Mode, click the Add button to add a user, input the password for the user, and select a user group from the drop-down list and then input the email address of the user. Click the Save button, the user should be listed in the User Management list.
NVR8008X Enterprise Rack Mount NVR 3.5.4 Recording Data Report This Recording Data Report shows the recording status of all the devices. On the left-side menu bar, click System Information and then click Recording Data Report. Click to select a Date and Time, click Related Device List to select devices, and click Query to display the recording status report. You can click By Minutes/ Second or By Hour to show the report in different timeline formats.
NVR8008X Enterprise Rack Mount NVR 3.5.5 Disk Information This Disk Information will automatically show the detailed information of all the installed hard disk drives, such as model name, disk type and capacity. On the left-side menu bar, click Storage Device and then click Disk Information. 3.5.6 Storage Device Management You can manage all the storage devices on this page. On the left-side menu bar, click Storage Device and then click Storage Device Management.
NVR8008X Enterprise Rack Mount NVR You can also configure the detailed settings for each group. Auto Erase Recording / Day(s): The hard disk will automatically erase video after it has been on the hard drive for the entered number of days. Overwrite: Check the box to overwrite the hard disk when the capacity is used up to 99% (the capacity does not include the locked space of the disk). Lock %: Enter a percentage for a write protected segment of the hard disk (will not be overwritten).
NVR8008X Enterprise Rack Mount NVR 2. Double-click a device to display the device setting, and then click Storage Device to select a desired disk group. 3. Click the Save button on the upper-right corner of the page.
NVR8008X Enterprise Rack Mount NVR 3.5.7 Motion Detection You can set up the motion detection of the IP camera on this page. On the left-side menu bar, click Event and then click Motion Detect. Check the Enable box on the devices which you want to set up the motion detection setting, and then click Edit Motion Grid to bring up the motion setting page. On the left side, click on a device or select multiple devices and its image will be displayed at the right side.
NVR8008X Enterprise Rack Mount NVR Chapter 4 4.
NVR8008X Enterprise Rack Mount NVR 0,1,5,6, 10 Yes Yes RAID Watchdog Instant Live View/Playback System Automatic Device Scanning Automatic Device Model Detection Log Tool License Management PTZ Point and click control (by camera) Go to Preset Positions Digital PTZ Support Panorama PTZ (360°) Joystick support Live View Public/Private View Max Content Per View Hide Toolbar View Tour Snapshot Instant Playback Recording & Backup Manual Record Always Record Schedule Record Record on Event Recording to Storage A
NVR8008X Enterprise Rack Mount NVR Yes Yes Yes Edge Motion Detection Camera Signal Lost Abnormal disk status Event Notification Camera Recording Trigger Digital Output Send E-mail On Screen Display Popup Live Video User Privilege Restrict Access to Live View Restrict Access to Playback Restrict Access to PTZ Configuration Privilege Others Supported Language Yes Yes Yes Yes Yes Yes Yes Yes Yes English, Japanese, Traditional Chinese, Spanish, Deutsch, French, Russian, Portuguese (Brazil),Dutch, Simplified C
NVR8008X Enterprise Rack Mount NVR Remote Client System Minimum Requirement OS CPU RAM LAN Transmission Speed Web Client Mobile Device Windows XP (32-bit) / Win7 (32 and 64-bit) Intel Core 2 Duo, 2.6GHz 4GB 10/100/1000 Mbps (RJ45) Internet Explorer 9 and later, Firefox 4.0-9.
EverFocus Electronics Corp. EverFocus Taiwan: 12F-1, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, New Taipei City, Taiwan TEL: +886 2 2698 2334 FAX: +886 2 2698 3943 www.everfocus.com.tw marketing@everfocus.com.tw EverFocus Europe - Germany: Albert-Einstein-Strasse 1, D-46446 Emmerich, Germany TEL: +49 2822 93940 FAX: +49 2822 939495 www.everfocus.de sales@everfocus.
