User`s manual

NVR8008X Enterprise Rack Mount NVR
36
3.5.7 Motion Detection
You can set up the motion detection of the IP camera on this page. On the left-side menu bar, click
Event and then click Motion Detect. Check the Enable box on the devices which you want to set up
the motion detection setting, and then click Edit Motion Grid to bring up the motion setting page.
On the left side, click on a device or select multiple devices and its image will be displayed at the
right side. Click and drag a rectangle on the image to set up a motion area, and the selected area
will be highlighted in blue. You can only set up one motion area. Click Apply to save the setting.