www.rackmountsolutions.net 1-866-207-6631 sales@rackmountsolutions.
U-1602 / U-3202 Cat5 Two Console KVM Installation screw A: M3.2 x 4.5 mm A B iew rV be Cy screw B: M4 x 10 mm ■ Install each bracket using screws provided shown in Figure 1. ■ Fix the KVM into the rack Figure 1. Installing the bracket to the KVM. iew rV be Cy Figure 2. Fixing the KVM into the rack.
U-1602 / U-3202 Cat5 Two Console KVM Package Content (only for rackmount KVM) 1 5 6 Remote I/O al User Manu Local Compute r VGA 9VDC 500mA Cat.5 Remo te Conso le Keyboard Mouse Remote 2 3 4 1 KVM switch x 1 pc 2 Screw M3.2 x 4.
U-1602 / U-3202 Cat5 Two Console KVM Connection U-1602 Local Console Remote Dual power console with failover Cascade U-3202 Connection Rackmount KVM Receiver Remote I/O Local Computer VGA 9VDC 500mA Cat.5 Remote Console Keyboard Mouse Remote Local Console Select Cat5 cable (up to 132 ft) Cat5 cable (up to 1,000 ft) DG-100S dongle Connection KVM modules Remote I/O Local Computer VGA Keyboard 9VDC 500mA Receiver Cat.
U-1602 / U-3202 Cat5 Two Console KVM Receiver Receiver Box Front View USB Keyboard Mouse Rear View Console Console LEDs Select 9VDC VGA Local Computer Remote I/O Receiver Connection U-1602 / U-3202 9V DC Power Adapter Monitor Cat5 cable up to 1,000 ft CB-6 KVM cable
U-1602 / U-3202 Cat5 Two Console KVM Cascade ■ Cascaded KVM ( Bank 2 to 8 ) must be single console Cat5 KVM - U-1601 / U-3201 ■ Cascading multiple KVM by CBC-6 cable ■ With the U-1602 cascade up to 128 servers. With the U-3202 cascade up to 256 servers.
DG-100 / DG-100S Dongle Connection DG-100 PS/2 dongle ■ To connect DB-15 connector to the computer’s video card ■ To connect keyboard connector to the computer’s keyboard port ■ To connect mouse connector to the computer’s mouse port mouse Cat5 KVM switch Keyboard DB-15 Cat5 cable (up to 132 ft) DG-100 PS/2 dongle PS/2 server DG-100S USB dongle ■ To connect DB-15 connector to the computer’s video card ■ To connect USB connector to the computer’s USB port Cat5 KVM switch USB DB-15 Cat5 cable (up to 13
KVM Membranes Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch finally computer Front Panel - Port LED Indications 16 ports Bank no. PC port LEDs Channel button Bank button 32 ports Bank no.
Password The password is disabled by default ( i.e. There is no password required when you power on the KVM switch for the first time) ■ Enable password 1. Press the KVM hotkey Scroll Lock + Scroll Lock + U 2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P 3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field (Do not use “0” on number pad) 4.
KVM OSD OSD Menu OSD operation next to the system name The PC is powered on next to the system name The PC is selected F1 Access F1 MAIN MENU F2 Logout the OSD menu F3 Previous menu Esc Cancel / Quit Enter Complete / Switch to selected port Switch to previous or next port PgUp/PgDn Switch to previous bank or next bank 1/2/3/4 Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32 Remark: Display port 17 ~ 32 for 32 port model only F1 Main Menu 01 LANGUAGE OSD language change 02 PORT NAME E
KVM Hotkey Local Console Hotkey Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Right-button mouse + Esc Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank Scroll Lock + Scroll Lock + Bank no. + Port no.
Optional Accessories 1. Cat5 cable 1.1 CU-3 3 feet 1.2 CU-6 6 feet 1.3 CU-10 10 feet 1.4 CU-15 15 feet 1.5 CU-33 33 feet 1.6 CU-66 66 feet 2. Cat5 / USB KVM cascade cable 2.1 CBC-6 6 feet 3. PS/2 Dongle for Cat5 KVM 3.1 DG-100 PS/2 4. USB Dongle for Cat5 KVM 4.1 DG-100S USB 5. Power cord 5.1 IEC power cord 5.2 NEMA 5-15 power cord (US) 5.3 BS 1363 power cord (UK) 5.4 CEE 7/4 power cord (German) 5.
DC Power 12V, 24V, 48V Input Model 12V 24V 48V Input voltage: 12-Volt 24-Volt 48-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V - No load 50 mA 50 mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.
Specification U-1602 / U-3202 ▀ ▀ ▀ Cat5 KVM Port Number of ports: 16 or 32 Connector: RJ-45 Connectivity: DG-100S USB dongle / DG-100 PS/2 dongle up to 132 feet Local Console Graphic connector: HDDB15-pin VGA Resolution: Up to 1600 x 1200 Input device: 2 x USB type A for keyboard & mouse Remote Console Connector: HDDB 15-pin, VGA Resolution: Up to 1600 x 1200 (500 feet), Up to 1024 x 768 (1000 feet) Input device: 2 x USB type A for keyboard & mouse Remote I/O: RJ45 via Cat5 / Cat5e
FAQ General 1. How do the KVM switches allow the user to switch ports? There are two ways to switch ports. One is the membrane buttons on the front and the other way is with Hot-key commands. 2. What operating systems do the KVMs support? The KVMs support multi-platform support allows you to control Windows-based computers, Sun Solaris systems, Linux, or even Macs by a single KVM switch.
FAQ 10. The server VGA resolution does not match the resolution of monitor ? The KVM supports DDC function which will dynamically detect and the DDC data. The problem may come from the power on sequence. For KVM switch The recommended power on sequence is - monitor, KVM switch and then servers. For remote console box It supports DDC function but does not support hot-plug, the recommend power on se quence is – monitor, remote console box and then servers.
Troubleshooting 1. There is no LED display on KVM membrane switch i. Make sure the power adapter plugged into the KVM Switch, if the LED’s still off, perform soft reset to KVM switch. ii. Power cycle KVM switch. 2. I can power on the KVM, but I am not getting any picture at all, how can I solve this? Switching to another port and checking if this port has the same problem a. If you switch to another port, please check the screen resolution is the same. b.