User's Manual

Use
VID priority
VID Priority Override. This parameter is used to indicate that frames assigned with
this VID can have their priority overridden with the VID priority value (see below) if the
port's VTU priority override parameters is enabled to do so. See VTU priority override
for more details.
VID priority
VID Priority override value when enabled by the Use VID priority parameter (see
above). Used for priority override on ingressing frames. Enabling a priority on a VID
will override the frame's priority only if the port's VTU priority override parameter is
enabled to do so.
VID policy
This parameter is used to indicate that frames assigned with this VID can have Layer
2 Policy actions applied to it if the port's Policy VTU (menu Advanced/Monitoring,
Policy/Policy) is enabled to do so.
Member tag
This parameters is used to indicate which ports are members of the VLAN (i.e, with
the given VID) and if these VLANs frames should be tagged or untagged, or unmodified
when exiting the port as follows:
Port is a member of this VLAN and frames are to egress unmodified.egress un-
modified
Port is a member of this VLAN and frames are to egress Untagged.egress un-
tagged
Port is a member of this VLAN and frames are to egress Tagged.egress
tagged
Port is not a member of this VLAN. The result is that frames assigned
with this VID can not egress this port.
not member
This parameter takes effect only if the 802.1q mode parameter (see menu Ad-
vanced/VLAN) is set to secure mode.
Add entry
Add a new VTU database entry.
Edit
Press the Edit button to open the configuration dialog of selected VTU database record.
NOTE: Should the Primary key value be modified, the "other" record - identified by
the entered Primary key - is added (if it doesn't exist yet) or modified (if it exists already).
Delete
Delete the selected VTU database record.
Flush all
Delete the whole VTU database.
RAy2 Microwave Link – © RACOM s.r.o.126
Configuration