User's Manual
Table Of Contents
- RAy2 Microwave Link
- Table of Contents
- Important Notice
- Quick guide
- List of documentation
- 1. RAy2 – Microwave Link
- 2. Implementation Notes
- 3. Product
- 4. Accessories
- 5. Step-by-step Guide
- 6. Installation
- 7. Configuration
- 8. Command Line Interface
- 9. Troubleshooting
- 10. Technical parameters
- 11. Safety, environment, licensing
- Appendix A. Antenna dimensions
- Appendix B. Rain zone map
- Appendix C. IP address in the PC (Windows XP)
- Appendix D. IP address in the PC (Windows 7)
- Appendix E. IP address in the PC (Windows 8)
- Appendix F. SSH key generation
- Appendix G. Https certificate
- Appendix H. Unit block diagrams
- Index
- Appendix I. Revision History
The Feature key is activated after the unit restart.
Firmware
Fig. 7.45: Menu Tools - Firmware
If a new firmware version is released for the given microwave link type, you can upload it to your RAy
units.
Info
Firmware
version
Information about the current firmware package version on Local and Peer unit.
Radio firmware
version
Information about the radio board current firmware version on Local and Peer unit.
Radio configura-
tion version
Radio board calibration data format version.
Hardware
version
Information about the HW version of the modem board.
Radio hardware
version
Information about the HW version of the radio board.
Firmware upgrade
RAy2 Microwave Link – © RACOM s.r.o.146
Configuration