User's Manual

Table Of Contents

Alarms Acknowledge

Fig. 7.16: Menu Link settings – Alarms – Acknowledge

Alarm acknowledgement is a way to allow the operator to confirm the system is in alarm state. Only

an active alarm can be acknowledged.

Multiple selection of active alarms (to acknowledge groups of alarms) can be performed using Shift or

Ctrl keys.

Alarm identification. The following alarms can appear:

Inside temperature, Voltage min, Voltage max, RSS, SNR, BER, Net bitrate, Air

link, Eth1 link, Eth2 link, RF power

Name

There are three possible alarm states:

OK ... No alarm (alarm is inactive) or alarm disabled.

Ack ... Alarm is active and acknowledged.

Alarm ... Alarm is active and is not acknowledged.

State

Time stamp when the alarm occured.From

Time stamp when the alarm expired (returned to normal conditions).To

Time stamp when the alarm was acknowledged.

Time stamp format: yyyy-MM-dd hh:mm:ss

Ack

Name (login) of the user who acknowledged the alarm.User

The comment field can be used to add user defined comments when 'alarm ac-

knowledge' is performed. Use this comment to describe important details of the

Comment

alarm status. The comment can be up to 50 characters long. Special characters

are not allowed.

The alarm can be acknowledged multiple times with different comments. Every

acknowledgement is written to the internal memory and is visible in the alarm log.

Configuration