User's Manual
Table Of Contents
- RipEX2 Radio modem & Router
- Table of Contents
- Important Notice
- 1. Quick guide
- 2. Product
- 3. Accessories
- 4. Installation
- 5. RipEX2 in detail
- 6. Web interface
- 7. Settings
- 7.1. Interfaces
- 7.1.1. Ethernet
- 7.1.2. Radio
- 7.1.3. COM
- 7.1.4. Terminal servers
- 7.1.5. Cellular
- 7.2. Routing
- 7.2.1. Static
- 7.2.2. OSPF
- 7.2.2.1. Description
- 7.2.2.2. Common - Common settings
- 7.2.2.3. Network - Areas and interfaces - Areas
- 7.2.2.4. Network - Areas and interfaces - Interfaces
- 7.2.2.5. Network - Areas and interfaces - Neighbors
- 7.2.2.6. Network - Areas and interfaces - Networks
- 7.2.2.7. Static rules
- 7.2.2.8. Import filter
- 7.2.2.9. Export filter
- 7.2.3. BGP
- 7.3. Firewall
- 7.4. VPN
- 7.5. Security
- 7.6. Device
- 7.7. Advanced
- 7.1. Interfaces
- 8. Diagnostics
- 9. Technical parameters
- 10. Safety, regulations, warranty
- 10.1. Frequency
- 10.2. Safety distance
- 10.3. High temperature
- 10.4. Battery disposal
- 10.5. Instructions for Safe Operation of Equipment
- 10.6. SW license
- 10.7. EU Compliance
- 10.8. Compliance Federal Communications Commission and Innovation, Science and Economic Development Canada
- 10.9. Compliance ANATEL Brasil
- 10.10. Warranty
- 10.11. RipEX2 Availability and service life time
- 10.12. RipEX2 maintenance
- Appendix A. Abbreviations
- Index
- Revision History
7.2.3.8. Export OUT filter
Export OUT filter rules. The order of rules matters. Maximum number of filter rules is 256.
• Filter policy
List box {Accept; Reject}, default = "Accept"
Defines what action is taken on the routing rules which were not captured (i.e. fallback) in the Export
OUT filter.
• Active
List box {On; Off}, default = "On"
Enables / disables the filter rule.
• Note
Informational note.
• Filter network
List box {Off; Match; Not match}, default = "Off"
Selects a method of the routing rule destination range comparison.
• Network IP / Network mask
List box {Off; Match; Not match}, default = "Off"
IP address and mask defines the network prefix to be compared
• Mask from
Number {0 – 32}, default = 0
• Mask to
Number {0 – 32}, default = 32
Definition of the enabled range of the mask length of the processed routing rule.
• Filter protocol
List box {Off; Match; Not match}, default = "Off"
Selects the way how the routing rule source protocol is compared.
• Protocol
List box {System; OSPF; BGP; BGP external; BGP internal}, default = "System"
Selection of the protocol origin. "System" – stands for rules from the ordinary routing table.
• Filter OSPF tag
List box {Off; Match; Not match}, default = "Off"
Selects the way of filtering based on OSPF tag.
• OSPF tag
Number {0 – 2
32
-1}, default = 0
OSPF tag to be compared. The tag is added to a rule when inserted to OSPF.
• Filter BGP path
List box {Off; Is empty; Not empty; Contain; Not contain}, default = "Off"
Filtering based on the BGP Path (routing rule path over different AS). "Is empty" – defines an empty
path (routing rule from the local AS). "Contain" – defines paths containing specific AS.
• Path position
List box {Any; Neighbor; Source}, default = "Any"
103© RACOM s.r.o. – RipEX2 Radio modem & Router
Settings