User's Manual
Table Of Contents
- RipEX2 Radio modem & Router
- Table of Contents
- Important Notice
- 1. Quick guide
- 2. Product
- 3. Accessories
- 4. Installation
- 5. RipEX2 in detail
- 6. Web interface
- 7. Settings
- 7.1. Interfaces
- 7.1.1. Ethernet
- 7.1.2. Radio
- 7.1.3. COM
- 7.1.4. Terminal servers
- 7.1.5. Cellular
- 7.2. Routing
- 7.2.1. Static
- 7.2.2. OSPF
- 7.2.2.1. Description
- 7.2.2.2. Common - Common settings
- 7.2.2.3. Network - Areas and interfaces - Areas
- 7.2.2.4. Network - Areas and interfaces - Interfaces
- 7.2.2.5. Network - Areas and interfaces - Neighbors
- 7.2.2.6. Network - Areas and interfaces - Networks
- 7.2.2.7. Static rules
- 7.2.2.8. Import filter
- 7.2.2.9. Export filter
- 7.2.3. BGP
- 7.3. Firewall
- 7.4. VPN
- 7.5. Security
- 7.6. Device
- 7.7. Advanced
- 7.1. Interfaces
- 8. Diagnostics
- 9. Technical parameters
- 10. Safety, regulations, warranty
- 10.1. Frequency
- 10.2. Safety distance
- 10.3. High temperature
- 10.4. Battery disposal
- 10.5. Instructions for Safe Operation of Equipment
- 10.6. SW license
- 10.7. EU Compliance
- 10.8. Compliance Federal Communications Commission and Innovation, Science and Economic Development Canada
- 10.9. Compliance ANATEL Brasil
- 10.10. Warranty
- 10.11. RipEX2 Availability and service life time
- 10.12. RipEX2 maintenance
- Appendix A. Abbreviations
- Index
- Revision History
Selects position of the specific AS (Path AS). "Any" – anywhere on the path. "Neighbor" – the path
was received from this AS (last on the path). "Source" – routing rule was originated from this AS (first
on the path).
• Path AS
Number {0 – 2
32
-1}, default = 65000
The number of the AS searched for.
• Action
List box {Accept; Reject; Pass}, default = "Accept"
Defines what action is taken on the routing rule. "Pass" continues in processing.
7.3. Firewall
7.3.1. Firewall L2
• Filter mode
list box {Blacklist, Whitelist}, default = "Blacklist"
○ Blacklist
The MAC addresses listed in the table are blocked, i.e. all packets to/from them are discarded.
The traffic to/from other MAC addresses is allowed.
○ Whitelist
Only the MAC addresses listed in the table are allowed, i.e. only packets to/from them are allowed.
The traffic to/from other MAC addresses is blocked.
• Active
List box {Off; On}, default = "On"
If "On", Layer 2 Linux firewall is activated.
• Interface
List box {All; ETH1..ETH5}, default = "All"
• MAC
IPv4 MAC address
RipEX2 Radio modem & Router – © RACOM s.r.o.104
Settings