User's Manual
Table Of Contents
- RipEX2 Radio modem & Router
- Table of Contents
- Important Notice
- 1. Quick guide
- 2. Product
- 3. Accessories
- 4. Installation
- 5. RipEX2 in detail
- 6. Web interface
- 7. Settings
- 7.1. Interfaces
- 7.1.1. Ethernet
- 7.1.2. Radio
- 7.1.3. COM
- 7.1.4. Terminal servers
- 7.1.5. Cellular
- 7.2. Routing
- 7.2.1. Static
- 7.2.2. OSPF
- 7.2.2.1. Description
- 7.2.2.2. Common - Common settings
- 7.2.2.3. Network - Areas and interfaces - Areas
- 7.2.2.4. Network - Areas and interfaces - Interfaces
- 7.2.2.5. Network - Areas and interfaces - Neighbors
- 7.2.2.6. Network - Areas and interfaces - Networks
- 7.2.2.7. Static rules
- 7.2.2.8. Import filter
- 7.2.2.9. Export filter
- 7.2.3. BGP
- 7.3. Firewall
- 7.4. VPN
- 7.5. Security
- 7.6. Device
- 7.7. Advanced
- 7.1. Interfaces
- 8. Diagnostics
- 9. Technical parameters
- 10. Safety, regulations, warranty
- 10.1. Frequency
- 10.2. Safety distance
- 10.3. High temperature
- 10.4. Battery disposal
- 10.5. Instructions for Safe Operation of Equipment
- 10.6. SW license
- 10.7. EU Compliance
- 10.8. Compliance Federal Communications Commission and Innovation, Science and Economic Development Canada
- 10.9. Compliance ANATEL Brasil
- 10.10. Warranty
- 10.11. RipEX2 Availability and service life time
- 10.12. RipEX2 maintenance
- Appendix A. Abbreviations
- Index
- Revision History
• DPD check period [s]
Number {5 - 28800}, default = 30
Dead Peer Detection check period
• DPD action
List box {Clear; Hold; Restart}, default = "Hold"
One of three connection states automatically activated when connection loss is detected:
○ Clear – connection is closed and waiting
○ Hold – connection is closed. Connection is established when first packet transmission through
tunnel is attempted.
○ Restart – connection is established immediately
7.4.2. GRE L2
GRE L2 tunnel is interconnected to the bridge (LAN interface) as one of the bridge’s port, it captures
Ethernet frames of the bridge and sends them to the other end of the tunnel. It enables to build bridge
via the complex network and combine the local partial networks to one network.
GRE L2 tunnel can be used to tunnel the IPv6 traffic over the RipEX IPv4 network.
RipEX2 Radio modem & Router – © RACOM s.r.o.114
Settings