User's Manual
Table Of Contents
- RipEX2 Radio modem & Router
- Table of Contents
- Important Notice
- 1. Quick guide
- 2. Product
- 3. Accessories
- 4. Installation
- 5. RipEX2 in detail
- 6. Web interface
- 7. Settings
- 7.1. Interfaces
- 7.1.1. Ethernet
- 7.1.2. Radio
- 7.1.3. COM
- 7.1.4. Terminal servers
- 7.1.5. Cellular
- 7.2. Routing
- 7.2.1. Static
- 7.2.2. OSPF
- 7.2.2.1. Description
- 7.2.2.2. Common - Common settings
- 7.2.2.3. Network - Areas and interfaces - Areas
- 7.2.2.4. Network - Areas and interfaces - Interfaces
- 7.2.2.5. Network - Areas and interfaces - Neighbors
- 7.2.2.6. Network - Areas and interfaces - Networks
- 7.2.2.7. Static rules
- 7.2.2.8. Import filter
- 7.2.2.9. Export filter
- 7.2.3. BGP
- 7.3. Firewall
- 7.4. VPN
- 7.5. Security
- 7.6. Device
- 7.7. Advanced
- 7.1. Interfaces
- 8. Diagnostics
- 9. Technical parameters
- 10. Safety, regulations, warranty
- 10.1. Frequency
- 10.2. Safety distance
- 10.3. High temperature
- 10.4. Battery disposal
- 10.5. Instructions for Safe Operation of Equipment
- 10.6. SW license
- 10.7. EU Compliance
- 10.8. Compliance Federal Communications Commission and Innovation, Science and Economic Development Canada
- 10.9. Compliance ANATEL Brasil
- 10.10. Warranty
- 10.11. RipEX2 Availability and service life time
- 10.12. RipEX2 maintenance
- Appendix A. Abbreviations
- Index
- Revision History
NotePeriodAction
Draining hole on dipole must be downward pointing
There should be no damaged elements on the antenna
Angle of elevation of antenna
Azimuth (angle of horizontal deviation) in accordance with design
Annually
Visual check – Coaxial Cable:
Mechanical damage
Solar degradation
Entire cable correctly mounted to surface
Connectors tightened to function optimally
Self-vulcanizing tape used for all connections requiring insulation
PSV & RF measurements
Annually
Visual check – Cabinet:
Mechanical damage
Damage resulting in lower categorization for cabinet coverage
Bushings for running cables
Annually
Visual check – Electricity Supply:
Insulation damage
Connection to terminals
Annually
Visual check – Accumulator:
Capacity in accordance with customer requirements
Condition of the accumulator
Annually
Functionality check – power source:
Overcharging
Accumulator damage
AnnuallyFull utilization of provided protective coverings
AnnuallyRemove any items which are not part of the installation
AnnuallyFix and secure makeshift installations correctly
As requiredCheck grounding connections
As requiredCheck lightning arrester : connectors must be tightened
AnnuallyCheck data connectors connected including securing screws
Monthly
Evaluate the RSS and DQ values as a preventive measure against
the failure of the connection. RSS and DQ values be similar to
those at time of comissioning.
MonthlyCheck activity logs to detect abnormalities in data transmissions
MonthlyCheck if internal temperature alarm has been triggered
As required
Check that firmware is latest stable version – upgrading FW
recommended when new features required
If you are unsure on any of the above, please contact RACOM technical support.
RipEX2 Radio modem & Router – © RACOM s.r.o.190
Safety, regulations, warranty