User's Manual
Table Of Contents
- RipEX2 Radio modem & Router
- Table of Contents
- Important Notice
- 1. Quick guide
- 2. Product
- 3. Accessories
- 4. Installation
- 5. RipEX2 in detail
- 6. Web interface
- 7. Settings
- 7.1. Interfaces
- 7.1.1. Ethernet
- 7.1.2. Radio
- 7.1.3. COM
- 7.1.4. Terminal servers
- 7.1.5. Cellular
- 7.2. Routing
- 7.2.1. Static
- 7.2.2. OSPF
- 7.2.2.1. Description
- 7.2.2.2. Common - Common settings
- 7.2.2.3. Network - Areas and interfaces - Areas
- 7.2.2.4. Network - Areas and interfaces - Interfaces
- 7.2.2.5. Network - Areas and interfaces - Neighbors
- 7.2.2.6. Network - Areas and interfaces - Networks
- 7.2.2.7. Static rules
- 7.2.2.8. Import filter
- 7.2.2.9. Export filter
- 7.2.3. BGP
- 7.3. Firewall
- 7.4. VPN
- 7.5. Security
- 7.6. Device
- 7.7. Advanced
- 7.1. Interfaces
- 8. Diagnostics
- 9. Technical parameters
- 10. Safety, regulations, warranty
- 10.1. Frequency
- 10.2. Safety distance
- 10.3. High temperature
- 10.4. Battery disposal
- 10.5. Instructions for Safe Operation of Equipment
- 10.6. SW license
- 10.7. EU Compliance
- 10.8. Compliance Federal Communications Commission and Innovation, Science and Economic Development Canada
- 10.9. Compliance ANATEL Brasil
- 10.10. Warranty
- 10.11. RipEX2 Availability and service life time
- 10.12. RipEX2 maintenance
- Appendix A. Abbreviations
- Index
- Revision History
• IP / Mask
IP address of the radio interface and the mask of the radio network.
• ACK
List box {On; Off}, default = "On"
Genetral setting of acknowledging of received packets. It can be set differently in individual link options.
• Retries [No.]
Number {0 .. 15}, default = 3
• Foreign packets RSS threshold [-dBm]
Number {50..150}, default = 120
When the received foreign packet (the packet which is not addressed to the actual unit) has weaker
signal (the listed number bigger, e.g. the limit 120 - in minus dBm - compared with actual RSS -126
dBm ), the channel is evaluated as free. If the foreign packet RSS is over this limit, the channel is
occupied and the unit will wait till the end of it with the procedure of transmission.
• Repeat COM broadcast
List box {On; Off}, default = "Off"
When On the broadcasted COM packets will be retranslated into the radio channel. When Off these
packets will not be repeated.
7.1.2.5. Advanced radio parameters
The Advanced setting option allows to customize radio and radio protocol parameters. Typically these
parameters should remain on default values.
These settings you can find in ADVANCED/Interfaces/Radio/ menu
7.1.2.5.1. Radio parameters - advanced
There is only one advanced radio parameter
• Maximal distance
Number {0 to 200}, default = "100"
65© RACOM s.r.o. – RipEX2 Radio modem & Router
Settings