Specifications

Installation and Operation Manual Quick Start Guide
ASMi-52CQ Ver. 2.12 Configuring ASMi-52CQ 3
 Unit Identical Set
 Receive gain
 Interface
 Transmit signal mask (DSU mode)
 Transmit signal mask (CSU mode)
 Fbit configuration.
Configuring the Line Parameters
³ To configure the line parameters:
1. If you have configured E1/T1 parameters, press <ESC> to return to the main
menu, and then repeat the steps above to access the Modem Setup menu.
2. In the Modem Setup menu, move the cursor to NEXT PARMETERS (LINE) field
by pressing <Tab> and select YES by pressing <F> or <B>.
The Modem Setup Menu: Line Parameters screen appears.
3. Configure the following line parameters:
 Power backoff
 Snext margin, if line probing is set to adaptive
 Current margin, if line probing is set to adaptive
 Power spectral density (line probing set to fixed only)
 Line probing
 Transmission mode
 Loop attenuation threshold
 SNR margin threshold.