Specifications

Chapter 4 Configuration Installation and Operation Manual
4-6 Memory Downloading ASMi-52CQ Ver. 2.12
Figure 4-2. Memory Map
Download Procedure
The download function updates the latest software version that exists in the
CM-2. The new software is stored (replacing the oldest version stored) in the
Flash memory.
The CM-2 modules with software version 4.0 store up to three different software
release files. Previous CM-2 modules store a single software release file for
ASMi-52CQ.
New software releases are distributed as *.img files.
The software download procedure consists of the following stages:
• Software download to the CM-2 module from the management station using
TFTP or XMODEM protocol (see
Downloading via LAN and Downloading via
XMODEM
sections).
Software download from the CM-2 to a single ASMi-52CQ card (see
Downloading
via CM-2 Flash
section) or to all the ASMi-52CQ modems simultaneously (see
Downloading a New Software Version to All the ASMi-52CQ Modems section).
Defining Type of Download
³ To define type of download:
1. From the Main Menu, select Modem Download.
2. Select the ASMi-52CQ slot and define the modem that you intend to
configure.
The screen shown in
Figure 4-3 appears.
3. Select a number for type of download.