Specifications

ASMi-52CQ Ver. 2.12 Configuring Advanced Modem Parameters B-1
Appendix B
Parameter List
This chapter lists:
• Command options to manage the ASMi-52CQ modem using an ASCII terminal
• Parameters with their values and explanations.
B.1 Configuring Advanced Modem Parameters
³ To configure advanced modem parameters:
1. From the Main menu, select Modem Operation.
2. Select the ASMi-52CQ slot.
The Modem Advanced Setup menu shown in
Figure B-1 appears. When
this menu first appears, all parameters are set to either the default or
inactive state to prevent an undesired modem response.
MODEM ADVANCED SETUP
MODEM NAME: ASMi-52CQ
DEFINE MODEM PORT NUMBER : 1
MODEM STATUS : MASTER
SELECT MODEM : MODEM 1 LOCAL
1) STOP STATUS UPDATE : DISABLE
2) CHANGE LOCAL MODEM STATUS : MASTER
3) MANAGEMENT FROM REMOTE MODEM : NO
4) MODEM MANAGEMENT LINK : N/A
5) LOAD CONFIGURATION FROM : N/A MODEM
6) I–TYPE (FAR_END MODEM TYPE) : YES
7) MODEM RESET : NO
8) FACTORY RESET : NO
9) CARD RESET : NO
Figure B-1. Modem Advanced Setup Menu
Bolded rows in Figure B-1 indicate parameters applicable to ASMi-52CQ.
Non-bolded parameters listed on the screen apply to other modems installed in
the LRS-24 chassis.
Table B-1 shows the operational parameters and options for ASMi-52CQ that can
be viewed and/or modified using this screen.