Specifications

Appendix B Parameter List Installation and Operation Manual
B-2 Configuring Advanced Modem Parameters ASMi-52CQ Ver. 2.12
Table B-1. Modem Advanced Setup Screen Parameters
Parameter Type Use Value Indication
MODEM NAME Read Viewing modem type
ASMi-52CQ
ASMi-52
The modem connected to the
terminal is:
Master ASMi-52CQ
Standalone modem
MODEM STATUS Read Viewing modem
configuration mode
MASTER N/A
SELECT MODEM Write Selecting the
modem, whose
operational
parameters are set
MODEM1 LOCAL
MODEM2 LOCAL
MODEM3 LOCAL
MODEM4 LOCAL
Operational parameters are set
for one of the local modems
installed in the LRS-24 chassis
MODEM1 REMOTE
MODEM2 REMOTE
MODEM3 REMOTE
MODEM4 REMOTE
Operational parameters are set
for one of the remote modems
STOP STATUS
UPDATE
Write Controlling status
information flow
from the modem to
CM-2
DISABLE Enables flow of status
information from modem to CM-
2
ENABLE Disables flow of status
information from modem to CM-
2. This may occur when CM-2
services other LRS-24 modems
and there is an overflow of
alarm messages.
MODEM RESET
Write Resetting the
modem line
YES Performs reset to modem line
NO Does not perform reset to
modem line
FACTORY RESET
Write
YES Resets modem to default
settings
NO Does not reset modem to
default settings
CARD RESET Write Resetting
parameters of card
YES Performs reset to card
NO Does not perform reset to card