Specifications

Quick Start Guide ASMi-52L Installation and Operation Manual
2 Configuring ASMi-52L
Configuring the Master Clock

To configure the master clock:
• From the System Configuration menu (Main menu > Configuration >
System Configuration > Master Clock), configure the central ASMi-52L clock
to external or internal and remote ASMi-52L clock to the receive clock.
Configuring the SHDSL Interface

To configure the SHDSL interface:
• From the SHDSL Configuration menu (Main menu > Configuration > Port
Configuration > SHDSL Configuration), configure the following SHDSL
parameters:
 SHDSL compatibility
 Power backoff
 Snext margin, if line probing is set to adaptive
 Current margin, if line probing is set to adaptive
 Power spectral density (for ASMi-52L with 2-wire line interface and line
probing set to fixed).
 Line probing
 Line type (for 4-wire ASMi-52L units only)
 Loop attenuation threshold
 SNR margin threshold.
Configuring the DTE Interface
ASMi-52L includes a serial or 10/100BaseT DTE interface.
Configuring the Serial Interface

To configure the serial interface:
• From the DTE Port Configuration (Main menu > Configuration > Port
Configuration > DTE Configuration), select the required data rate.
Configuring the 10/100BaseT Interface

To configure 10/100BaseT parameters:
1. From the LAN Configuration menu (Main menu > Configuration > LAN
Configuration), configure the following LAN parameters:
 Operation mode
 Bridge static table
 Aging timeout
 LAN rate.
For units with the four port integrated switch, configure the parameters one time.
2. Configure the Autonegotiation per port
3. Configure the Max Advertised Capability per port.
Note