Specifications

ASMi-52L Installation and Operation Manual Chapter 3 Operation
Default Settings 3-3
3.3 Default Settings
ASMi-52L is managed by an ASCII terminal or PC running a terminal emulation
program via menu-driven embedded software. Table 3-4 lists the default settings of
the ASMi-52L configuration parameters.
Table 3-4. Default Settings
Parameter Default Value
System
Clock Internal
Sys contact –
Sys location –
Sys name –
Host IP address 0.0.0.0
Host IP mask 0.0.0.0
Host default gateway 0.0.0.0
Read community public
Write community public
Trap community public
SNMP allowed Access allowed
Telnet allowed Access allowed
WEB allowed Access allowed
LAN operation mode Transparent
Encapsulation CRC No
Bridging Mode Access only
Aging Timeout 10
Autonegotiation Enable
Max AutoNeg Capability 100BaseT-full duplex mode
Control port rate 9600 bps
Data 8
Parity None
Interface DCE
CTS =RTS
DSR ON
Port control mode Terminal
User name –