Specifications

ASMi-52L Installation and Operation Manual Chapter 4 Configuration
Displaying the ASMi-52L Status 4-23
ASMi-52L
System Status
Local Remote
Device Type ASMi52_SA_L(PLASTIC) ASMi52_SA_L(PLASTIC
SHDSL Mode STU_C - 4W STU_R - 4W
Clock Source INT RCV
Software Version 1.00e06 1.00e06
Hardware Version 0.00 0.00
FPGA Version 0.01 0.01
Hardware Status NO HARDWARE FAILURE NO HARDWARE FAILURE
PS 48-60VDC/100-240VAC 48-60VDC/100-240VAC
MAC address 00 20 d2 23 29 1b 00 20 d2 23 29 2a
IP address 172.17.161.73 172.17.161.75
Alarm Indication MAJOR MAJOR
Test Indication OFF OFF
>
ESC-prev.menu; !-main menu; &-exit; @-scroll; ?-help 1 user(s)
Figure 4-28. System Status Screen
Alarms are described in Chapter 5.
Displaying the Port Status

To display the port status information:
1. Follow the path: Monitoring > Physical Port Status
The Physical Port Status menu appears.
2. From the Physical Port Status menu, select Port Status to display the port status.
The Port Status screen appears (see Figure 4-29).
3. Type N to display the next page.
ASMi-52L
Port local status
SHDSL (Standard ANNEX A, 2W) (Standard ANNEX A, 2W)
SHDSL Line (Status:NOT SYNC, State: IDLE) (Status:NOT SYNC, State: IDLE)
Framer Type (SLOTTED T1) (SLOTTED T1)
EOC compatible (STANDARD) (STANDARD)
Actual PSD (PSD UNKNOWN) (PSD UNKNOWN)
Line rate (not applicable) (not applicable)
T1 interface (IR-G704/BAL 1536 kbps) (IR-G704/BAL 1536 kbps))
HW status (NO HARDWARE FAILURE) (NO HARDWARE FAILURE)
Test status (NONE)> (NONE)>
(N)
ESC-prev.menu; !-main menu; &-exit;
Figure 4-29. Port Status Screen
The physical port alarms are described in Chapter 6.
Note
Note